Hoppa till innehåll

Sökresultat Sökningen pågår Sökresultaten dyker upp här efterhand. Du kan fortsätta skriva om du vill begränsa sökningen.
Söker efter filmer
Söker efter produktkategorier
Söker efter användare
Söker efter gallerier
Sök forumtrådar
Stäng

Uppdatera ComHem programkort

1 svar till detta ämne
  • Vänligen logga in för att kunna svara

#1

Postad 22 januari 2011 - 16:34

pelle3000
  • pelle3000
  • Rookie

  • 7 inlägg
  • 0
Jag fick efter en del möda betalkanalerna från Com Hems Large-utbud att fungera. Men efter någon vecka slutade det plötsligt att funka, får LAMc som status. Dock funkar fortfarande SVT HD-kanalerna trots att de är krypterade (status LAMC). Detta får mig att tro att det är uppdateringen av nycklarna till programkortet som inte funkar. Mitt upplägg är följande:

Ett (senare två) Technotrend Budget C-1501, virtuella enheter med dvbloopback.

Phoenix-läsare (USB)

newcs 1.66

sasc-ng 0.0.2-61975953edd0+ (utcheckat från mercury-repot för kanske 3 veckor sen)

Kommandorad som sasc-ng startas med:

[codebox]sasc-ng --daemon --log /var/log/sasc-ng.log --join 0:2 --join 1:3 --sid-nocache --debug 0xf0a --cam-budget --cam-dir /etc/camfiles --pidfile /var/run/sasc-ng.pid[/codebox]

Relevanta delar av newcs.xml (har klippt bort allt som jag inte tror har med EMM/ECM att göra):

[codebox]
<readers name="Standard Phoenix on PC">
<device>
<blocksa>No</blocksa>
<blockua>No</blockua>
<blockga>No</blockga>
<blockC0>Yes</blockC0>
<autosid>Yes</autosid>
<protectedsid>
<!-- valid value for id are:
4 numbers, if the service id is 3 numbers, add a 0 infront of it. -->
<id>0000</id><id>0001</id><id>0002</id>
</protectedsid>
<sid>
<allow>
<!-- valid value for id are:
4 numbers, if the service id is 3 numbers, add a 0 infront of it. -->
<id>0000</id><id>0001</id><id>0002</id>
</allow>
<deny>
<!-- valid value for id are:
4 numbers, if the service id is 3 numbers, add a 0 infront of it. -->
<id>0000</id><id>0001</id><id>0002</id>
</deny>
</sid>
</device>
</readers>
<radegastserver>
<!-- valid value for enable are:
Yes, No - Enable or Disable radegast server. -->
<enabled>Yes</enabled>

<!-- valid value for port are:
0,65535 - Which port to listen for incomming connections. -->
<port>10001</port>

<allow>
<!-- valid value for hostname are:
all, IP-address or DNS-name. -->
<hostname>all</hostname>
</allow>
</radegastserver>
<cache>
<!-- valid value for emm are:
0-255 - Number of EMM&#39;s to cache. -->
<emm>20</emm>

<!-- valid value for ecm are:
0-255 - Number of ECM&#39;s to cache.
-1 - Dynamic ECM Cache. -->
<ecm>-1</ecm>
</cache>
<newcamdserver>
<user>
<au>on</au>
<sidoverride>on</sidoverride>
<!-- valid value for rate are:
1-60 - number of seconds between each ecm -->
<rate>2</rate>
</user>
</newcamdserver>

[/codebox]

När det funkade använde jag radegast, cardclient.conf såg ut så här:
[codebox]
radegast:127.0.0.1:10001:1/0b00/ff00:newcs:newcs:0102030405060708091011121314
[/codebox]

Nu har jag också försökt med newcamd-protokollet:
[codebox]
newcamd:127.0.0.1:15050:1/0b00/ff00:dummy:dummy:0102030405060708091011121314
[/codebox]

Sen hittade jag info om att radegast inte stöder EMM-uppdateringar. Eftersom alla verkar rekommendera radegast över newcamd så provade jag att köra båda protokollen, men med EMM påslaget enbart över newcamd, i hopp om att radegast ska användas för själva avkrypteringen, men newcamd för EMM-uppdateringarna:
[codebox]
radegast:127.0.0.1:10001:0/0b00/ff00:newcs:newcs:0102030405060708091011121314
newcamd:127.0.0.1:15050:1/0b00/ff00:dummy:dummy:0102030405060708091011121314
[/codebox]

För alla dessa tre varianter har jag provat att låta MythTV stå och visa Com Hem-kanalen i minst en timme (enligt otydliga instruktioner på Com Hems hemsida), och därefter växlat till en betalkanal, men utan resultat (får bara LAMc).

Följande rader dök upp i sasc-ng loggen då jag väntade på en uppdatering:
[codebox]
Jan 22 13:31:22.777 CAM(core.net): socket: select timed out (20000 ms)
Jan 22 13:31:22.786 CAM(cardclient.core): recv error. reconnecting...
Jan 22 13:31:22.798 CAM(cardclient.newcamd): failed to read message length
Jan 22 13:31:22.811 CAM(cardclient.newcamd): unexpected server response (code 0)
Jan 22 13:31:22.822 CAM(cardclient.core): client Newcamd (127.0.0.1:15050) ECM failed (20087 ms)
Jan 22 13:31:22.822 CAM(core.au): 0: stopping chain 0b00
Jan 22 13:31:22.834 CAM(core.ecm): 0.1: filter flush (elapsed 20331)
Jan 22 13:31:22.846 CAM: SC completed Tune cmd
Jan 22 13:31:22.858 CAM(core.ecm): 0.1: hold timeout expired
Jan 22 13:31:22.871 CAM(core.pids): 0: update SID 1017 (zero=0 noshift=0)
Jan 22 13:31:22.945 CAM(core.ecm): 0.1: triggered SID 1130/-1 idx 1/1 mode 0/0 -
Jan 22 13:31:22.958 CAM(core.pids): 0: pids typ5=1001 typ5=1101 typ5=1f01
Jan 22 13:31:22.970 CAM(core.ecm): 0.1: new caDescr: <empty>
Jan 22 13:31:22.982 CAM(core.pids): SimplyCa entry pidCa=0
Jan 22 13:31:23.006 CAM(core.pids): prgca: 09 04 0B 00 E3 F9
Jan 22 13:31:23.018 CAM(core.pids): pidca 1001: <empty>
Jan 22 13:31:23.030 CAM(core.pids): pidca 1101: <empty>
Jan 22 13:31:23.042 CAM(core.pids): pidca 1f01: <empty>
Jan 22 13:31:23.120 CAM(core.pids): SimplyCa exit pidCa=0
Jan 22 13:31:23.134 CAM(core.pids): prgca: 09 04 0B 00 E3 F9
Jan 22 13:31:23.146 CAM(core.pids): pidca 1001: <empty>
Jan 22 13:31:23.158 CAM(core.pids): pidca 1101: <empty>
Jan 22 13:31:23.171 CAM(core.pids): pidca 1f01: <empty>
Jan 22 13:31:23.182 CAM(core.pids): 0: SID=1017 zero=0 | sid=-/-/- zero=-/-/- idle=1/-1/1
Jan 22 13:31:23.194 CAM(core.pids): 0: found handler for SID 1017 (0.1 idle=1 idx=1)
Jan 22 13:31:23.206 CAM(core.ecm): 0.1: setting new SID 1017
Jan 22 13:31:23.218 CAM(core.pids): 0.1: pids on entry
Jan 22 13:31:23.231 CAM(core.pids): 0.1: pids after delete
Jan 22 13:31:23.242 CAM(core.pids): 0: descrambling pid 1001 on index 1
Called cSascDvbDevice::SetCaPid
Jan 22 13:31:23.278 CSA: Got command(2): P idx: 1 pid: 4097
Jan 22 13:31:23.290 CAM(core.pids): 0: descrambling pid 1101 on index 1
Called cSascDvbDevice::SetCaPid
Jan 22 13:31:23.326 CSA: Got command(2): P idx: 1 pid: 4353
Jan 22 13:31:23.339 CAM(core.pids): 0: descrambling pid 1f01 on index 1
Called cSascDvbDevice::SetCaPid
Jan 22 13:31:23.374 CSA: Got command(2): P idx: 1 pid: 7937
Jan 22 13:31:23.386 CAM(core.pids): 0.1: pids after add typ5=1001 typ5=1101 typ5=1f01
Jan 22 13:31:23.398 CAM(core.ecm): 0.1: is no longer idle
Jan 22 13:31:23.410 CAM(core.pids): 0: update SID 1017 (zero=0 noshift=0)
Jan 22 13:31:23.410 CAM(core.ecm): 0.1: triggered SID -1/1017 idx 1/1 mode 1/0 -
Jan 22 13:31:23.424 CAM(core.pids): 0: pids typ5=1101 typ5=1001
Jan 22 13:31:23.434 CAM(core.ecm): 0.1: new caDescr: 09 04 0B 00 E3 F9
Jan 22 13:31:23.446 CAM(core.pids): SimplyCa entry pidCa=0
Jan 22 13:31:23.458 CAM(core.ecm): 0.1: CA descriptors for SID 1017 (len=6)
Jan 22 13:31:23.470 CAM(core.pids): prgca: <empty>
Jan 22 13:31:23.481 CAM(core.ecm): 0.1: descriptor 0b 00 e3 f9
Jan 22 13:31:23.493 CAM(core.pids): pidca 1101: <empty>
Jan 22 13:31:23.506 CAM(core.ecm): 0.1: found 0b00(0000) (Conax) id 0000 with ecm 3f9/80 (new)
Jan 22 13:31:23.518 CAM(core.pids): pidca 1001: <empty>
[/codebox]

Det står ju "ECM failed" i början, och något som kanske antyder att sasc-ng och newcs har svårt att prata med varandra? newcs-loggen runt samma tidpunkt innehåller bara:
[codebox]
[ 13:31:19 ] [ Chameleon2 ] selectserver: new connection from 127.0.0.1 on socket 14
[ 13:31:19 ] [ Chameleon2 ] Connected to localhost on port 1234 on Handle 13
[ 13:31:19 ] [ Chameleon2 ] Adding user myname to UserBase on handle 13 (Mode 0)
[ 13:31:22 ] [ Newcamd:15050 ] User dummy logout
[ 13:31:37 ] [ Chameleon2 ] selectserver: socket 14 hung up
[ 13:32:36 ] [ Chameleon2 ] selectserver: new connection from 127.0.0.1 on socket 13
[ 13:32:36 ] [ Chameleon2 ] Connected to localhost on port 1234 on Handle 12
[ 13:32:36 ] [ Chameleon2 ] Adding user myname to UserBase on handle 12 (Mode 0)
[ 13:32:51 ] [ Chameleon2 ] selectserver: socket 13 hung up
[ 13:33:02 ] [ SockSrv ] Socket 11 hung up
[ 13:33:02 ] [ SockSrv ] Clearing FD handle 11
[ 13:33:02 ] [ SockSrv ] FD handle cleared and released
[ 13:33:02 ] [ Chameleon ] Cycling to SELECT after a break
[ 13:33:51 ] [ Chameleon2 ] selectserver: new connection from 127.0.0.1 on socket 12
[ 13:33:51 ] [ Chameleon2 ] Connected to localhost on port 1234 on Handle 11
[ 13:33:51 ] [ Chameleon2 ] Adding user myname to UserBase on handle 11 (Mode 0)
[ 13:34:06 ] [ Chameleon2 ] selectserver: socket 12 hung up
[ 13:35:07 ] [ Chameleon2 ] selectserver: new connection from 127.0.0.1 on socket 12
[ 13:35:07 ] [ Chameleon2 ] Connected to localhost on port 1234 on Handle 11
[ 13:35:07 ] [ Chameleon2 ] Adding user myname to UserBase on handle 11 (Mode 0)
[ 13:35:25 ] [ Chameleon2 ] selectserver: socket 12 hung up
[/codebox]

Här är ett utdrag ur sasc-ng loggen då jag försökte byta till en betalkanal (TV 3):
[codebox]
Jan 22 16:15:37.762 CHANNEL: Got Pid: 290
Jan 22 16:15:37.798 CHANNEL: Got Pid: 264
Jan 22 16:15:37.810 CHANNEL: Got Pid: 263
Jan 22 16:15:37.822 CHANNEL: Got Pid: 262
Jan 22 16:15:37.841 CHANNEL: Got Pid: 261
Jan 22 16:15:37.854 CHANNEL: Got Pid: 257
Jan 22 16:15:37.866 CHANNEL: Got Pid: 16
Jan 22 16:15:37.878 CHANNEL: Got Pid: 0
Jan 22 16:15:37.901 CHANNEL: Sending PID: 4104
Jan 22 16:15:37.914 CHANNEL: Got Pid: 4104
Jan 22 16:15:37.914 demux: Opened fd: 11=23 mode: 104002
Jan 22 16:15:37.926 CHANNEL: Found sid: 1130
Jan 22 16:15:37.938 demux: Got command 44 (size: 28)
Jan 22 16:15:37.984 CAM(core.pids): 0: tune to same source/transponder
Jan 22 16:15:37.994 demux: ioctl on (23) returned: 0
Jan 22 16:15:38.007 CAM: SC completed Tune cmd
Jan 22 16:15:38.018 : DMX_SET_PES_FILTER(23): pid:4360 in:FRONTEND out:TS_TAP type:OTHER
flags: IMMEDIATE_START
Jan 22 16:15:38.030 CAM(core.pids): 0: update SID 1130 (zero=0 noshift=0)
Jan 22 16:15:38.042 CHANNEL: Sending PID: 4360
Jan 22 16:15:38.054 CAM(core.pids): 0: pids typ5=1008 typ5=1108 typ5=1f08
Jan 22 16:15:38.066 CHANNEL: Got Pid: 4360
Jan 22 16:15:38.066 demux: Opened fd: 12=27 mode: 104002
Jan 22 16:15:38.079 CAM(core.pids): SimplyCa entry pidCa=0
Jan 22 16:15:38.109 CHANNEL: Found sid: 1130
Jan 22 16:15:38.122 demux: Got command 44 (size: 28)
Jan 22 16:15:38.134 CAM(core.pids): prgca: 09 04 0B 00 E4 6A
Jan 22 16:15:38.158 demux: ioctl on (27) returned: 0
Jan 22 16:15:38.170 CAM(core.pids): pidca 1008: <empty>
Jan 22 16:15:38.182 : DMX_SET_PES_FILTER(27): pid:7944 in:FRONTEND out:TS_TAP type:OTHER
flags: IMMEDIATE_START
Jan 22 16:15:38.206 CHANNEL: Sending PID: 7944
Jan 22 16:15:38.195 CAM(core.pids): pidca 1108: <empty>
Jan 22 16:15:38.235 CHANNEL: Got Pid: 7944
Jan 22 16:15:38.246 CAM(core.pids): pidca 1f08: <empty>
Jan 22 16:15:38.258 CHANNEL: Skipping pid 7944 because type is 6
Jan 22 16:15:38.271 CAM(core.pids): SimplyCa exit pidCa=0
Jan 22 16:15:38.295 CAM(core.pids): prgca: 09 04 0B 00 E4 6A
Jan 22 16:15:38.308 CAM(core.pids): pidca 1008: <empty>
Jan 22 16:15:38.318 CAM(core.pids): pidca 1108: <empty>
Jan 22 16:15:38.330 CAM(core.pids): pidca 1f08: <empty>
Jan 22 16:15:38.349 CAM(core.pids): 0: SID=1130 zero=0 | sid=-/-/- zero=-/-/- idle=1/-1/1
Jan 22 16:15:38.362 CAM(core.pids): 0: found handler for SID 1130 (0.1 idle=1 idx=1)
Jan 22 16:15:38.374 CAM(core.ecm): 0.1: setting new SID 1130
Jan 22 16:15:38.386 CAM(core.pids): 0.1: pids on entry
Jan 22 16:15:38.399 CAM(core.pids): 0.1: pids after delete
Jan 22 16:15:38.410 CAM(core.pids): 0: descrambling pid 1008 on index 1
Called cSascDvbDevice::SetCaPid
Jan 22 16:15:38.446 CSA: Got command(2): P idx: 1 pid: 4104
Jan 22 16:15:38.466 CAM(core.pids): 0: descrambling pid 1108 on index 1
Called cSascDvbDevice::SetCaPid
Jan 22 16:15:38.502 CSA: Got command(2): P idx: 1 pid: 4360
Jan 22 16:15:38.514 CAM(core.pids): 0: descrambling pid 1f08 on index 1
Called cSascDvbDevice::SetCaPid
Jan 22 16:15:38.550 CSA: Got command(2): P idx: 1 pid: 7944
Jan 22 16:15:38.563 CAM(core.pids): 0.1: pids after add typ5=1008 typ5=1108 typ5=1f08
Jan 22 16:15:38.574 CAM(core.ecm): 0.1: is no longer idle
Jan 22 16:15:38.588 MSG: Got unprocessed message type: 1
Jan 22 16:15:38.601 CAM(core.ecm): 0.1: triggered SID -1/1130 idx 1/1 mode -1/0 -
Jan 22 16:15:38.610 CAM(core.ecm): 0.1: new caDescr: 09 04 0B 00 E4 6A
Jan 22 16:15:38.622 CAM(core.ecm): 0.1: CA descriptors for SID 1130 (len=6)
Jan 22 16:15:38.634 CAM(core.ecm): 0.1: descriptor 0b 00 e4 6a
Jan 22 16:15:38.647 CAM(core.ecm): 0.1: found 0b00(0000) (Conax) id 0000 with ecm 46a/80 (new)
Jan 22 16:15:38.658 CAM(core.ecm): 0.1: try system Conax (0b00) id 0000 with ecm 46a (pri=-10)
Jan 22 16:15:38.702 CAM(conax.key): missing 20 E key
Jan 22 16:15:38.706 CAM(core.ecm): system: no key found for C 20 M
Jan 22 16:15:38.720 CAM(core.au): 0: chain caid 0500 -> Viaccess(-10) [0300-8b/fe/07]
Jan 22 16:15:38.730 CAM(core.au): 0: chain caid 0b00 -> Cardclient(-15) [0300-82/ff/00]
Jan 22 16:15:38.742 CAM(core.au): 0: starting chain 0b00
Jan 22 16:15:38.810 CAM(conax.key): missing 20 E key
Jan 22 16:15:38.905 CAM(core.ecm): 0.1: try system Cardclient (0b00) id 0000 with ecm 46a (pri=-15)
Jan 22 16:15:39.013 CAM(cardclient.core): cc-loop
Jan 22 16:15:39.018 CAM(cardclient.core): now trying client Radegast (127.0.0.1:10001)
Jan 22 16:15:39.216 CAM(cardclient.ecm): Radegast: key not available from server
Jan 22 16:15:39.222 CAM(cardclient.core): client Radegast (127.0.0.1:10001) ECM failed (192 ms)
Jan 22 16:15:39.234 CAM(cardclient.core): now trying client Newcamd (127.0.0.1:15050)
Jan 22 16:15:39.248 CAM(core.net): connecting to 127.0.0.1:15050/tcp (127.0.0.1)
Jan 22 16:15:39.262 CAM(cardclient.login): Newcamd: CaID=0b00 admin=1 srvUA=00000000538897F5 provider 000000/000000000029C44B
Jan 22 16:15:59.291 CAM(core.net): socket: select timed out (20000 ms)
Jan 22 16:15:59.294 CAM(cardclient.core): recv error. reconnecting...
Jan 22 16:15:59.306 CAM(cardclient.newcamd): failed to read message length
Jan 22 16:15:59.319 CAM(cardclient.newcamd): unexpected server response (code 0)
Jan 22 16:15:59.330 CAM(cardclient.core): client Newcamd (127.0.0.1:15050) ECM failed (20083 ms)
Jan 22 16:15:59.330 CAM(general.error): action logger 0/1 read: Buffer overflow
Jan 22 16:15:59.342 CAM(core.ecm): 0.1: filter flush (elapsed 20329)
Jan 22 16:15:59.417 CAM(cardclient.core): cc-loop
Jan 22 16:15:59.422 CAM(cardclient.core): now trying client Radegast (127.0.0.1:10001)
Jan 22 16:15:59.620 CAM(cardclient.ecm): Radegast: key not available from server
Jan 22 16:15:59.626 CAM(cardclient.core): client Radegast (127.0.0.1:10001) ECM failed (192 ms)
Jan 22 16:15:59.638 CAM(cardclient.core): now trying client Newcamd (127.0.0.1:15050)
Jan 22 16:15:59.650 CAM(core.net): connecting to 127.0.0.1:15050/tcp (127.0.0.1)
Jan 22 16:15:59.665 CAM(cardclient.login): Newcamd: CaID=0b00 admin=1 srvUA=00000000538897F5 provider 000000/000000000029C44B
Jan 22 16:16:04.164 CAM(core.auStats): EMM packet load average (1/4/10min) 160 45 22 pks/s
Jan 22 16:16:19.700 CAM(core.net): socket: select timed out (20000 ms)
Jan 22 16:16:19.706 CAM(cardclient.core): recv error. reconnecting...
Jan 22 16:16:19.718 CAM(cardclient.newcamd): failed to read message length
Jan 22 16:16:19.731 CAM(cardclient.newcamd): unexpected server response (code 0)
Jan 22 16:16:19.743 CAM(cardclient.core): client Newcamd (127.0.0.1:15050) ECM failed (20093 ms)
Jan 22 16:16:19.743 CAM(general.error): action logger 0/1 read: Buffer overflow
Jan 22 16:16:19.754 CAM(core.ecm): 0.1: filter flush (elapsed 20337)
Jan 22 16:16:19.778 CAM(core.ecm): 0.1: CA descriptors for SID 1130 (len=6)
Jan 22 16:16:19.790 CAM(core.ecm): 0.1: descriptor 0b 00 e4 6a
Jan 22 16:16:19.810 CAM(core.ecm): 0.1: found 0b00(0000) (Conax) id 0000 with ecm 46a/80 (already present)
Jan 22 16:16:19.821 CAM(core.ecm): 0.1: try system Conax (0b00) id 0000 with ecm 46a (pri=-10)
Jan 22 16:16:19.834 CAM(conax.key): missing 20 E key
Jan 22 16:16:19.846 CAM(core.ecm): system: no key found for C 20 M
Jan 22 16:16:19.917 CAM(conax.key): missing 20 E key
Jan 22 16:16:20.026 CAM(core.ecm): 0.1: try system Cardclient (0b00) id 0000 with ecm 46a (pri=-15)
Jan 22 16:16:20.120 CAM(cardclient.core): cc-loop
Jan 22 16:16:20.126 CAM(cardclient.core): now trying client Radegast (127.0.0.1:10001)
Jan 22 16:16:20.324 CAM(cardclient.ecm): Radegast: key not available from server
Jan 22 16:16:20.330 CAM(cardclient.core): client Radegast (127.0.0.1:10001) ECM failed (193 ms)
Jan 22 16:16:20.342 CAM(cardclient.core): now trying client Newcamd (127.0.0.1:15050)
Jan 22 16:16:20.354 CAM(core.net): connecting to 127.0.0.1:15050/tcp (127.0.0.1)
Jan 22 16:16:20.369 CAM(cardclient.login): Newcamd: CaID=0b00 admin=1 srvUA=00000000538897F5 provider 000000/000000000029C44B
Jan 22 16:16:22.929 demux: Closed fd: 17 ret: 0
Jan 22 16:16:22.934 demux: Closed fd: 6 ret: 0
Jan 22 16:16:22.947 demux: Closed fd: 18 ret: 0
Jan 22 16:16:22.960 demux: Closed fd: 19 ret: 0
Jan 22 16:16:22.970 demux: Closed fd: 20 ret: 0
Jan 22 16:16:22.982 demux: Closed fd: 21 ret: 0
Jan 22 16:16:22.994 demux: Closed fd: 22 ret: 0
Jan 22 16:16:23.007 demux: Closed fd: 24 ret: 0
Jan 22 16:16:23.022 demux: Closed fd: 25 ret: 0
Jan 22 16:16:23.038 demux: Closed fd: 26 ret: 0
Jan 22 16:16:23.052 demux: Closed fd: 14 ret: 0
Jan 22 16:16:23.066 demux: Closed fd: 23 ret: 0
Jan 22 16:16:23.078 demux: Closed fd: 27 ret: 0
Jan 22 16:16:23.090 CSA: Removing csa for rb: 2
[/codebox]

Och motsvarande tidsperiod från newcs-loggen:
[codebox]
[ 16:15:39 ] [ Newcamd:15050 ] User dummy logged in, client: Generic
[ 16:15:50 ] [ Chameleon2 ] selectserver: socket 13 hung up
[ 16:15:59 ] [ Newcamd:15050 ] User dummy logout
[ 16:15:59 ] [ Newcamd:15050 ] User dummy logged in, client: Generic
[ 16:16:19 ] [ Newcamd:15050 ] User dummy logout
[ 16:16:20 ] [ Newcamd:15050 ] User dummy logged in, client: Generic
[ 16:16:40 ] [ Newcamd:15050 ] User dummy logout
[ 16:16:40 ] [ Newcamd:15050 ] User dummy logged in, client: Generic
[ 16:17:00 ] [ Newcamd:15050 ] User dummy logout
[ 16:17:01 ] [ Newcamd:15050 ] User dummy logged in, client: Generic
[ 16:17:21 ] [ Newcamd:15050 ] User dummy logout
[ 16:17:21 ] [ Newcamd:15050 ] User dummy logged in, client: Generic
[ 16:17:41 ] [ Newcamd:15050 ] User dummy logout
[ 16:17:42 ] [ Newcamd:15050 ] User dummy logged in, client: Generic
[ 16:17:51 ] [ Chameleon2 ] selectserver: new connection from 127.0.0.1 on socket 14
[ 16:17:51 ] [ Chameleon2 ] Connected to localhost on port 1234 on Handle 13
[ 16:17:51 ] [ Chameleon2 ] Adding user myname to UserBase on handle 13 (Mode 0)
[ 16:18:02 ] [ Newcamd:15050 ] User dummy logout
[ 16:18:02 ] [ Newcamd:15050 ] User dummy logged in, client: Generic
[ 16:18:04 ] [ Chameleon2 ] selectserver: socket 14 hung up
[ 16:18:23 ] [ Newcamd:15050 ] User dummy logout
[ 16:18:23 ] [ Newcamd:15050 ] User dummy logged in, client: Generic
[ 16:18:43 ] [ Newcamd:15050 ] User dummy logout
[ 16:18:44 ] [ Newcamd:15050 ] User dummy logged in, client: Generic
[ 16:19:04 ] [ Newcamd:15050 ] User dummy logout
[ 16:19:04 ] [ Newcamd:15050 ] User dummy logged in, client: Generic
[ 16:19:24 ] [ Newcamd:15050 ] User dummy logout
[ 16:19:25 ] [ Newcamd:15050 ] User dummy logged in, client: Generic
[ 16:19:45 ] [ Newcamd:15050 ] User dummy logout
[ 16:19:46 ] [ Newcamd:15050 ] User dummy logged in, client: Generic
[ 16:20:05 ] [ Chameleon2 ] selectserver: new connection from 127.0.0.1 on socket 14
[ 16:20:05 ] [ Chameleon2 ] Connected to localhost on port 1234 on Handle 13
[ 16:20:05 ] [ Chameleon2 ] Adding user myname to UserBase on handle 13 (Mode 0)
[ 16:20:06 ] [ Newcamd:15050 ] User dummy logout
[ 16:20:06 ] [ Newcamd:15050 ] User dummy logged in, client: Generic
[ 16:20:18 ] [ Chameleon2 ] selectserver: socket 14 hung up
[ 16:20:26 ] [ Newcamd:15050 ] User dummy logout
[ 16:20:27 ] [ Newcamd:15050 ] User dummy logged in, client: Generic
[/codebox]

Tacksam för hjäp.

#2

Postad 29 januari 2011 - 22:32

pelle3000
  • pelle3000
  • Rookie

  • 7 inlägg
  • 0
OK, när jag satte på TV:n häromdan så funkade det plötsligt, verkar som att konfigurationen faktiskt kan ta emot programkorts-uppdateringar, men att det tar betydligt längre tid än en timme. Får hoppas att det inte blir ytterligare strul nästa månad.



1 användare läser detta ämne

0 medlemmar, 1 gäster, 0 anonyma medlemmar

Prisjakt © 2000 - 2019 Prisjakt   Denna sajt använder cookies.   Våra regler.   Personuppgiftspolicy.