[Unregistered47b7abd7]

• 0

Har problem med Sasc-ng som jag vill få ordning på..

Startar jag sasc-ng så visas detta:

» Klicka här för att visa spoiler - Klicka en gång till för att dölja den... «

16:07:48.879016 : Version: 0.0.2-166/112
16:07:48.879288 CAM: initializing plugin: SoftCam (0.8.2): A software emulated CAM
Sep 20 16:07:48 [general.info] SC version 0.8.2 initializing
16:07:48.879520 CAM: starting plugin:
Sep 20 16:07:48 [general.info] SC version 0.8.2 starting
Sep 20 16:07:48 [core.load] ** Plugin config:
Sep 20 16:07:48 [core.load] ** Key updates (AU) are enabled (active CAIDs)
Sep 20 16:07:48 [core.load] ** Local systems DON'T take priority over cached remote
Sep 20 16:07:48 [core.load] ** Concurrent FF recordings are NOT allowed
Sep 20 16:07:48 [core.load] ** Force transfermode with digital audio
Sep 20 16:07:48 [core.load] ** ScCaps are 1 2 0 0 0 0 0 0 0 0
Sep 20 16:07:48 [core.load] ** Ignored CAIDs 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
Sep 20 16:07:48 [general.info] loading keys from /etc/camfiles/SoftCam.Key
Sep 20 16:07:48 [core.load] loaded 16 keys from /etc/camfiles/SoftCam.Key
Sep 20 16:07:48 [core.load] ** registered systems:
Sep 20 16:07:48 [core.load] ** Cardclient (pri -15)
Sep 20 16:07:48 [core.load] ** Conax (pri -10)
Sep 20 16:07:48 [core.load] ** ConstCW (pri -20)
Sep 20 16:07:48 [core.load] ** Cryptoworks (pri -10)
Sep 20 16:07:48 [core.load] ** Irdeto (pri -10)
Sep 20 16:07:48 [core.load] ** Nagra (pri -10)
Sep 20 16:07:48 [core.load] ** Nagra2 (pri -10)
Sep 20 16:07:48 [core.load] ** SC-Conax (pri -5)
Sep 20 16:07:48 [core.load] ** SC-Cryptoworks (pri -5)
Sep 20 16:07:48 [core.load] ** SC-Irdeto (pri -5)
Sep 20 16:07:48 [core.load] ** SC-Nagra (pri -5)
Sep 20 16:07:48 [core.load] ** SC-Seca (pri -5)
Sep 20 16:07:48 [core.load] ** SC-VG2 (pri -5)
Sep 20 16:07:48 [core.load] ** SC-Viaccess (pri -5)
Sep 20 16:07:48 [core.load] ** Seca (pri -10)
Sep 20 16:07:48 [core.load] ** @SHL (pri -10)
Sep 20 16:07:48 [core.load] ** Viaccess (pri -10)
Sep 20 16:07:48 [general.error] Failed to open file '/etc/camfiles/cardclient.conf': No such file or directory
Sep 20 16:07:48 [cardclient.core] created 0 client(s)
Sep 20 16:07:48 [general.error] Failed to open file '/etc/camfiles/Ird-Beta.KID': No such file or directory
Sep 20 16:07:48 [core.load] loaded 0 Irdeto cards from /etc/camfiles/Ird-Beta.KID
Sep 20 16:07:48 [general.error] Failed to open file '/etc/camfiles/Seca.KID': No such file or directory
Sep 20 16:07:48 [core.load] loaded 0 Seca cards from /etc/camfiles/Seca.KID
Sep 20 16:07:48 [general.error] Failed to open file '/etc/camfiles/Viaccess.KID': No such file or directory
Sep 20 16:07:48 [core.load] loaded 0 Viaccess cards from /etc/camfiles/Viaccess.KID
Sep 20 16:07:48 [general.error] Failed to open file '/etc/camfiles/smartcard.conf': No such file or directory
Sep 20 16:07:48 [general.warn] no smartcard interface defined!
16:07:49.883491 frontend: Starting thread on /dev/dvb/adapter2/frontend1
The thread scheduling parameters indicate:
policy = 0
priority = 0
16:07:49.883564 demux: Starting thread on /dev/dvb/adapter2/demux1
The thread scheduling parameters indicate:
policy = 0
priority = 0
16:07:49.887472 dvr: Starting thread on /dev/dvb/adapter2/dvr1
The thread scheduling parameters indicate:
policy = 1
priority = 99
16:07:50.891366 dvr: Starting thread on /dev/dvb/adapter3/dvr1
The thread scheduling parameters indicate:
policy = 1
priority = 99
16:07:50.891424 frontend: Starting thread on /dev/dvb/adapter3/frontend1
The thread scheduling parameters indicate:
policy = 0
priority = 0
16:07:50.891461 demux: Starting thread on /dev/dvb/adapter3/demux1
The thread scheduling parameters indicate:
policy = 0
priority = 0
16:07:50.891622 : Listening on port 5456

Saknar jag detta eller är det nåt jag ska skita i?
kör newcs o den är rätt configad o körs

när jag försöker göra en scan på loopback så får jag så här.
scanning secomhem
using '/dev/dvb/adapter3/frontend0' and '/dev/dvb/adapter3/demux0'
main:2247: FATAL: failed to open '/dev/dvb/adapter3/frontend0': 1 Operation not permitted

Vad menas?

[Unregistered47b7abd7]

• 0

Får såg jag nu från newcs

[ Newcamd:15000 ] Can't decrypt client msg, rejecting!

vad saknar jag?

[jukk]

• 0

Om du kör newcs så vill du antagligen konfigurera sasc-ng som klient. Verkar som om du inte skulle ha gjort det:

Sep 20 16:07:48 [general.error] Failed to open file '/etc/camfiles/cardclient.conf': No such file or directory

[Unregistered47b7abd7]

• 0

Hur gör jag det?

Hittar ju knappt ingen dokumentation för sasc-ng o söker man på nätet så hittar man ju typ inget

[Unregistered46c16d7d]

• 0

Finns i dokumentationen för newcs.

Här är en kopia på min:
#
# Comment lines can start with # or ;
#
# every client line starts with the client name, followed by some arguments:
# 'hostname' is the name of the server
# 'port' is the port on the server
# 'emm' is a flag to allow EMM transfers to the server
# (0=disabled 1=enabled)
# 'caid' (optional) caid on which this client should work
# 'mask' (optional) mask for caid e.g. caid=1700 mask=FF00 would allow
# anything between 1700 & 17FF.
# Default is 1700 & FF00. If only caid is given mask is FFFF.
# You may give multiple caid/mask values comma separated
# (e.g. 1702,1722,0d0c/ff00).
# 'username' is the login username
# 'password' is the login password
#
# newcamd client
# 'cfgkey' is the config key (28bytes)
newcamd:192.168.0.101:10010:1:mythtv:mythtv:0102030405060708091011121314

[Unregistered47b7abd7]

• 0

hmm. men så har jag ju i min cardclient.conf i sasc-ng redan

Redigerat av Unregistered47b7abd7, 20 september 2007 - 21:29.

[mrd33jay]

• 0

hmm. men så har jag ju i min cardclient.conf i sasc-ng redan

<{POST_SNAPBACK}>

Har du din cardclient.conf enligt nedan?
Failed to open file '/etc/camfiles/cardclient.conf': No such file or directory

Edit: Stavfel

Redigerat av mrd33jay, 21 september 2007 - 17:20.

[Unregistered47b7abd7]

• 0

Alla problem har lösts sig.
Installerade Fedora 7 o sasc-ng går som en dröm