Hjälp innan jag blir helt knäpp!!
Har installerat UMC för att titta på playkanaler, spotify å se film från datorn.
Har försökt att få till detta men får inte till det.
Hur gör jag?
UMS.conf:
# ============================================================================
# Configuration file for UMS
# ============================================================================
# Introduction:
#
# This "UMS.conf" file holds the configuration settings for UMS. These settings
# are usually set using the UMS graphical user interface. If you are running
# UMS on a headless system, you may not be able to kick off the GUI; instead,
# you can edit the UMS.conf file to control the operation of UMS. A restart of
# UMS is required after editing this file.
#
# Commenting out an option or leaving it empty forces the UMS default
# that is indicated.
#
# Key value pairs
# ---------------
# The configuration file contains key/value pairs separated by an equals (=)
# sign; the key on the left and the value on the right. The value is edited in
# this file or set using the UMS GUI and saved. The value can take a number of
# different forms:
#
# - toggle: a checkbox or boolean; either "true" or "false"
# - selector: a dropdown menu in the GUI, generating a string or numeric
# value. Available options will usually be stated below
# - string: a short text or a number
# - text: a longer text with embedded line breaks
# - list: a comma-separated list of strings or numbers
#
# In the file below the value type is shown after the GUI option label.
#
# ----------------------------------------------------------------------------
# General Configuration Tab
# ----------------------------------------------------------------------------
# ---< General Settings >-----------------------------------------------------
# Profile Name
# --------------
# An optional identifier used to distinguish this profile (i.e. collection of
# settings) from other profiles. The profile name is displayed in the renderer
# in square brackets after the software name e.g.
#
# Universal Media Server [myprofile]
#
# See the FAQ for details on how to create and use multiple profiles:
#
http://www.universal...com/faq/#Setup2
# Default: the server's hostname.
name =
# Interface Language
# -------------------
# GUI option: Language (selector)
# The language to use for the GUI and other dialogues.
# The following translations are available:
# ar = Arab
# bg = Bulgarian
# ca = Catalan
# zhs = Chinese (Simplified)
# zht = Chinese (Traditional)
# cz = Czech
# da = Danish
# nl = Dutch
# en = English
# fi = Finish
# fr = French
# de = German
# el = Greek
# is = Icelandic
# it = Italian
# iw = Hebrew
# ja = Japanese
# ko = Korean
# no = Norwegian
# pl = Polish
# pt = Portuguese
# br = Portuguese (Brazilian)
# ro = Romanian
# ru = Russian
# sl = Slovenian
# es = Spanish
# sv = Swedish
# tr = Turkish
# The short-form code (e.g. = en) is used to set the language.
# Default: "", which means UMS will follow the locale.
language =
# Operating Mode
# --------------
# GUI Option: Start Minimized (toggle)
# Sets whether the GUI should start when the program is launched.
# On headless systems, this should be "true".
# Default: false
minimized =
# Check for updates
# -----------------
# GUI Option: Check automatically (toggle)
# Default: false.
auto_update =true
# ---< Network Settings >-----------------------------------------------------
# Generally these settings should not need to be changed from their defaults or
# settings determined automatically by the system. Changing them may make your
# UMS server disappear from your other devices.
# Interface
# ---------
# GUI Option: Force networking on interface (selector)
# Specifies the (physical) network interface to attach to, should only be
# relevant when the server has more than one network interface and UMS picks
# the wrong one. The selector displays all available network interfaces.
# E.g. network_interface = eth0
# Default: "", which means UMS will automatically select a network interface.
network_interface =eth0
# Specifies a comma separated list of network interfaces to ignore when
# scanning for a suitable network interface to attach to. This is typically
# used to ignore virtual interfaces created by other applications.
# Default: "tap,vmnet,vnic", which ignores interfaces named "tap0", "tap1" and
# "tap2", but it allows an interface named "eth0".
skip_network_interfaces =
# IP Address
# ----------
# GUI Option: Force IP of the server (string)
# A network interface can be have multiple IP addresses associated with it.
# This sets which one should be used.
# Default: "", which means UMS will automatically select an IP address.
hostname =
# Server port
# -----------
# GUI Option: Force the port of the server (string)
# Sets the port UMS will listen on; usually should not need to be set unless
# another service has already grabbed the port.
# Default: "", which means UMS will automatically pick port 5001.
port =1400
# Client Filter
# -------------
# GUI Option: Use an IP filter (string)
# Set the IP address(es) and/or IP address range(s) of the clients permitted to
# connect. When no filter is specified, UMS will allow any IP address to
# connect to the service.
# Multiple IP addresses and/or IP address ranges can be separated with a comma
# or semicolon e.g.: 127.0.0.1,192.168.0-1.*
# Default: ""
ip_filter =
# Max Bandwidth
# -------------
# GUI Option: Maximum bandwidth in Mb/s (string)
# Set the maximum bandwidth to be consumed by the server.
# Leaving the setting blank or zero switches off bandwidth throttling.
# Default: 110
maximumbitrate =
# ---< Advanced HTTP and system settings >------------------------------------
# HTTP Engine v2
# --------------
# GUI Option: HTTP Engine v2 (toggle)
# Default: true
http_engine_v2 =false
# Do not sleep
# ------------
# GUI Option: Prevent OS from sleeping while streaming (toggle)
# If your host server has a power-saving mode, use this option to prevent the
# server hibernating or sleeping while it is streaming data.
# Default: false
prevents_sleep_mode =
# GUI Option: Default renderer when automatic detection fails (selector)
# UMS can recognize many renderers automatically. Sometimes a renderer will
# connect which UMS does not recognize. This option defines which renderer UMS
# should assume.
# Default: "", which means UMS will assume the "Unknown renderer".
renderer_default =PlayStation 3
# GUI Option: Force default renderer (disable automatic detection) (toggle)
# By default UMS tries to automatically detect what renderers try to connect to
# it. When this is true, UMS will assume any renderer that connects is the
# default renderer.
# Default: false
renderer_force_default =
# ---< Plugins >--------------------------------------------------------------
# The directory where UMS can find the plugins.
# Default: "plugins"
plugins =
# ----------------------------------------------------------------------------
# Navigation/Share Settings Tab
# ----------------------------------------------------------------------------
# ---< Thumbnails >-----------------------------------------------------------
# Generate Thumbnails
# -------------------
# GUI Option: Generate Thumbnails
# Set whether or not to generate thumbnails of media files for the client.
# Default: true
thumbnails =true
# Thumbnail seeking position
# --------------------------
# GUI Option: Thumbnail seeking position (string)
# Amount of time (in seconds) to skip in video media before generating
# thumbnail data, designed to pass over usual black screen before movies start.
# Default: 2
thumbnail_seek_pos =
# Use MPlayer for Thumbnails
# --------------------------
# GUI Option: Use MPlayer for video thumbnails (toggle)
# Whether or not to use MPlayer to generate the thumbnails for video; can
# produce better results than built-in method.
# Default: false, which will use the built-in method.
use_mplayer_for_video_thumbs =
# DVD thumbnails
# --------------
# GUI Option: DVD ISO thumbnails (toggle)
# Choose whether or not to show thumbnails of ISO images.
# Default: false
dvd_isos_thumbnails =
# Image thumbnails
# --------------
# GUI Option: Image thumbnails (toggle)
# Choose whether or not to show thumbnails of images.
# Default: true
image_thumbnails =true
# Album cover art
# ---------------
# GUI Option: Audio thumbnails display (selector)
# Choose how to get thumbnails for audio files (cover art), value is a number
# from the following list (equivalent to GUI dropdown order):
# 0 - Alphabetical (A-Z) - search local filesystem
# 1 - download from Amazon
# 2 - download from Discogs
# Default: 0
audio_thumbnails_method =
# Source of video cover art
# -------------------------
# GUI Option: Alternate video cover art folder (selector)
# Specify a folder below which appropriate cover art for videos might be
# located. Providing no value (default) effectively disables video thumbnails.
# The GUI offers a file-system navigator which generates an absolute path.
# Default: ""
alternate_thumb_folder =
# ---< Navigation/Parsing settings >------------------------------------------
# Instructs the system on how to find media and various controls on giving
# clients access to transcoding facilities and features.
# Compressed Archives
# -------------------
# GUI Option: Browse compressed archives (toggle)
# Should the system browse compressed files looking for media? Files are
# extracted only when selected for viewing.
# Supported formats: cbr, cbz, rar and zip.
# Default: false
enable_archive_browsing =
# Hide Video settings
# -------------------
# GUI Option: Hide Video settings (toggle)
# Control visibility of the Video Settings folder on clients; contents of the
# folder allow direct editing of UMS settings for video.
# Default: false
hidevideosettings =
# Hide Transcode folder
# ---------------------
# GUI Option: Hide Transcode folder (toggle)
# Control visibility of the Transcode folder on clients; contents of the folder
# provide control over transcoding of video.
# Default: false
hide_transcode_folder =
# Transcode Folder Name
# ---------------------
# Assign a different name to the #--TRANSCODE--# folder e.g. "Subtitles" or
# "Languages".
# Default: The localized version of "#--TRANSCODE--#".
transcode_folder_name =
# Hide file extensions
# --------------------
# GUI Option: Hide file extensions (toggle)
# Choose whether or not to show file extensions when showing file name in
# client listings.
# Default: true
hide_extensions =
# Hide engine names
# -----------------
# GUI Option: Hide engine names (toggle)
# Choose whether or not to show transcoding engine names for video; see also
# "Hide Transcode Folder" setting.
# Default: true
hide_enginenames =
# Hide non-media folders
# ----------------------
# GUI Option: Hide non-media folders (toggle)
# Choose whether or not to show folders which contain no viewable content.
# Switching this on can slow down browsing in the client (folders must be
# checked for content first before showing them); using a cache (see below) can
# help.
# Default: false
hide_empty_folders =
# Show iTunes library
# -------------------
# GUI Option: Show iTunes library (toggle)
# Choose whether or not to show the iTunes library as a folder in UMS.
# Default: false
itunes =
# Show iPhoto library
# -------------------
# GUI Option: Show iPhoto library (toggle)
# Choose whether or not to show the iPhoto library as a folder in UMS.
# Default: false
iphoto =
# Show Aperture library
# ---------------------
# GUI Option: Show aperture library (toggle)
# Choose whether or not to show the Aperture library as a folder in UMS.
# Default: false
aperture =
# Enable cache
# ------------
# GUI Option: Enable cache (toggle)
# Without a cache, when the client browses a folder, content is listed in
# real-time. With a cache, additional information becomes available and the
# cache can be browsed directly.
# Default: false
usecache =
# Hide cache folder
# -----------------
# GUI Option: Hide cache folder (toggle)
# Controls whether or not the cache can be browsed directly by the client.
# Default: false
hide_media_library_folder =
# File ordering
# -------------
# GUI Option: File ordering (selector)
# Determines the order of listed content when a client browses a folder; the
# GUI selector generates a numeric indicator according to the following.
# 0 - Alphabetical A-Z
# 1 - By date (newest first)
# 2 - By reverse date (oldest first)
# 3 - ASCIIbetical (i.e. using ASCII code values)
# 4 - Alphanumeric (AKA natural sort e.g. "Season 2" before "Season 10")
# Default: 4
key_sort_method =
# Ignore the word "the" while sorting
# -------------
# GUI Option: Ignore the word "the" while sorting (toggle)
# Controls whether or not to ignore the word "the" while sorting files.
# Default: true
ignore_the_word_the =
# Minimum item limit before using A-Z folders
# -----------------
# GUI Option: Minimum item limit before using A-Z folders (string)
# Specifies how many items must be in a folder before we create virtual
# subfolders for each letter.
# Default: 10000
atz_limit =
# ---< Shared folders >-------------------------------------------------------
# Media Locations
# ---------------
# GUI Option: Shared folders dialogue (list)
# Either define a list of specific folders containing media to be shared or
# allow the system to browse the whole disk of the server. The GUI provides a
# system navigation to generate a list of folders. The list should contain a
# comma-separated list of absolute path names, or leave it empty to let the
# system find media.
# Default: ""
folders =
# ----------------------------------------------------------------------------
# Transcoding Settings Tab
# ----------------------------------------------------------------------------
# Transcoder engines
# GUI Option: Ordered list of engines (selector)
# System generates list of available engines, list depends on host.
# XXX Can be empty, which overrides the default value.
# Default: "mencoder,avsmencoder,tsmuxer,ffmpegvideo,ffmpegaudio,mplayeraudio,tsmuxeraudio,ffmpegwebvideo,vlcvideo,mencoderwebvideo,mplayervideodump,mplayerwebaudio,vlcaudio,ffmpegdvrmsremux,rawthumbs"
# engines =
# ----------------------------------------------------------------------------
# Transcoding Settings Tab: Common Transcode Settings Page
# ----------------------------------------------------------------------------
# ---< General settings >-------------------------------------------------------
# Transcode buffer size
# ---------------------
# GUI Option: Transcode buffer maximum size (string)
# Size of buffer in MB before transmitting to client. The maximum value is 400
# if the program memory is set to its default value (768).
# Default: 200
maxvideobuffer =
# Cores for Transcoding
# ---------------------
# GUI Option: Number of cores for transcoding (selector)
# Choose the number of processor cores that should be used for transcoding.
# Default: "", which will use automatic-detection.
nbcores =
# Chapters #--TRANSCODE--# folder support
# -----------------------------------
# GUI Option: Chapters #--TRANSCODE--# folder support (toggle)
# Makes UMS create virtual chapter markers in a video file. These let
# you jump to a specific point in a video.
# Default: false
chapter_support =
# Chapters #--TRANSCODE--# folder support interval
# --------------------------------------------
# GUI Option: Chapters #--TRANSCODE--# folder support interval (string)
# Determines the interval time in minutes for virtual chapter markers.
# Default: 5
chapter_interval =
# Definitely disable subtitles
# ---------------------------
# GUI Option: Definitely disable subtitles (toggle)
# Default: false
mencoder_disablesubs =
# ---< Video Settings Tab >-----------------------------------------------
# Enable GPU acceleration
# -----------------
# GUI Option: Enable GPU acceleration (toggle)
# Works only on video cards with GPU acceleration supported.
# Default: false
gpu_acceleration =
# Remux DVD
# ---------
# GUI Option: Remux DVD ISO video track (toggle)
# Default: true
mencoder_remux_mpeg2 =
# ---< Misc settings >--------------------------------------------------------
# MPEG-2 options
# --------------
# GUI Option: MPEG-2 options (string)
# Sets the quality for MPEG-2 conversion; MPEG-2 is the fallback format if the
# client does not support a video format natively.
# Note: This is also used by FFmpeg and AviSynth/FFmpeg engines, not just
# MEncoder. Should probably be renamed to something like mpeg2_settings in the
# future.
# Default: "keyint=5:vqscale=1:vqmin=2"
mencoder_encode =
# Skip transcode for extensions
# -----------------------------
# GUI Option: Skip transcode for extensions (list)
# Do not transcode files with an extension in the list.
# Default: ""
notranscode =
# Force transcode for extensions
# ------------------------------
# GUI Option: Force transcode for extensions (list)
# Always transcode file with an extension in the list.
# Default: ""
forcetranscode =
# ---< Audio Settings Tab >-------------------------------------------------------
# Universal Media Server decides what to do with the audio track by checking
# options in the following order:
# 1. (AC3 and DTS tracks) Keep DTS track / Keep AC3 track => remuxes track
# as-is
# 2. (all tracks) Use LPCM transcoding => transcodes track with LPCM transport
# (lossless)
# 3. (all tracks) Use AC3 transcoding => transcodes track with AC3 transport
# (lossy)
# AC3 transcoding audio channels
# --------------
# GUI Option: Maximum audio channels (selector)
# The maximum number of channels used for AC3 transcoding. Do not change this
# value even if you use 2.0 speakers because of a MEncoder downmixing bug!
# Default: 6
audiochannels =
# Use LPCM for audio
# ---------------------------
# GUI Option: Use LPCM for audio (lossless, not suitable for Wi-Fi) (toggle)
# Choose whether or not the Pulse Code Modulation (PCM) audio format should be
# used instead of AC3 with the MEncoder transcoding engine. Offers lossless
# transcoding quality but higher bitrate. Bandwidth requirements are about 1.5
# Mbit/s for 2.0 and 4.6 Mbit/s for 5.1 audio. Not suitable for Wi-Fi
# streaming!
# Default: false
mencoder_usepcm =
# Keep AC3 track
# ---------------
# GUI Option: Keep AC3 tracks (no re-encode, may cause choppy sound and A/V
# sync issues) (toggle)
# Default: true
mencoder_remux_ac3 =
# Keep DTS track
# ------------------
# GUI Option: Keep DTS tracks (no re-encode, compatible with AV receiver
# through optical or HDMI output) (toggle)
# Default: false
embed_dts_in_pcm =
# AC3 transcoding audio bitrate
# -----------------
# GUI Option: AC3 re-encoding audio bitrate (string)
# Specify the bitrate for AC3 transcoding; do not exceed the quality supported
# by the AV receiver or amplifier.
# Default: 640
audiobitrate =
# Audio language priority
# -----------------------
# GUI Option: Audio language priority (list)
# A comma-separated list of language codes that defines the priority for
# MEncoder when choosing audio languages, where "und" stands for "undefined".
# XXX Can be empty, which overrides the default value.
# Default: a localized list (e.g. "eng,fre,jpn,ger,und").
# mencoder_audiolangs =
# ---< Subtitles Settings Tab >-------------------------------------------------------
# Subtitle language priority
# --------------------------
# GUI Option: Subtitle language priority (list)
# A comma-separated list of language codes that defines the priority for
# MEncoder when choosing subtitle languages, where "und" stands for
# "undefined". XXX Can be empty, which overrides the default value.
# Default: a localized list (e.g. "eng,fre,jpn,ger,und").
# mencoder_sublangs =
# Force subtitle language
# -----------------------
# GUI Option: Force subtitle language (string)
# Default: "", which will let UMS pick the subtitle language.
# XXX Can be empty, which overrides the default value.
# forced_sub_lang =
# Forced tags
# -----------
# GUI Option: Forced tags (string)
# The tag string that identifies the subtitle language that will be forced
# upon MEncoder.
# Default: "forced"
forced_sub_tags =
# Subtitles folder blank
# ----------------------
# GUI Option: Subtitles folder (string)
# GUI offers a navigator to a folder generating an absolute path.
# Default: ""
alternate_subs_folder =
# Load subtitles
# --------------
# GUI Option: Load subtitles
# Choose whether UMS should check for external subtitle files with the same
# name as the media (*.srt, *.sub, *.ass, etc.).
# Default: true
autoloadsrt =
# ----------------------------------------------------------------------------
# Transcoding Settings Tab: MEncoder Page
# ----------------------------------------------------------------------------
# ---< General settings >-----------------------------------------------------
# MEncoder: Enable multithreading
# ------------------
# GUI Option: Enable multithreading (toggle)
# Whether MEncoder should use multithreading
# Default: "", which will use automatic-detection.
mencoder_mt =
# Skip loop filter
# ----------------
# GUI Option: Skip loop filter
# Default: false
skiploopfilter =
# A/V sync alternative method
# -------------------------
# GUI Option: A/V sync alternative method
# Default: true
mencoder_nooutofsync =
# Use Video Scaler
# ----------------
# GUI Option: Use Video Scaler
# Default: false
mencoder_scaler =
# GUI Option: Video scaler width
# Default: 0
mencoder_scalex =
# GUI Option: Video scaler height
# Default: 0
mencoder_scaley =
# Force framerate
# ---------------
# GUI Option: Force framerate
# Default: false
mencoder_forcefps =
# Deinterlace filter
# ------------------
# GUI Option: Deinterlace filter
# Default: false
mencoder_yadif =
# Remux videos
# ------------
# GUI Option: Remux videos
# Default: true
mencoder_mux_compatible =
# Codec specific parameters
# -------------------------
# GUI Option : Use application default codec parms
# Default: true
mencoder_intelligent_sync =
# GUI Option: Codec specific parameters (text)
# Sets additional codec-specific configuration options for MEncoder.
# Default: ""
codec_spec_script =
# Custom options
# --------------
# GUI Option: Custom options (string)
# Default: ""
mencoder_decode =
# ---< Subtitles settings >---------------------------------------------------
# Audio language priority
# -----------------------
# GUI Option: Audio language priority (string)
# Determine the string of audio language and subtitle language pairs ordered by
# priority for MEncoder to try to match. Audio language and subtitle language
# should be comma separated as a pair; individual pairs should be semicolon
# separated. "*" can be used to match any language. Subtitle language can be
# defined as "off" (e.g. "jpn,off;*,*").
# Default: "".
mencoder_audiosublangs =
# Subtitles codepage
# ------------------
# GUI Option: Codepage for non-Unicode subtitles (string)
# The character encoding (or code page) that MEncoder should use for
# non-Unicode external subtitles.
# Default: "" (autodetect, do not force encoding with -subcp key).
mencoder_subcp =
# FriBiDi
# -------
# GUI Option: FriBiDi (toggle)
# Determine whether or not MEncoder should use FriBiDi mode, which is needed to
# display subtitles in languages that read from right to left, like Arabic,
# Farsi, Hebrew, Urdu, etc.
# Default: false
mencoder_subfribidi =
# Subtitle font blank
# -------------------
# GUI Option: Subtitle font (string)
# GUI offers a navigator to a folder generating an absolute path.
# Default: ""
mencoder_font =
# Use ASS/SSA styling
# -------------------
# GUI Option: Use ASS/SSA subtitle styling (toggle)
# Choose whether or not MEncoder supports ASS/SSA subtitles.
# Default: true
mencoder_ass =true
# Enable MEncoder fontconfig support
# -------------
# GUI Option: Fontconfig/Embedded fonts (toggle)
# Default: true
mencoder_fontconfig =true
# Use embedded style
# ------------------
# GUI Option: Use embedded style (toggle)
# Default: true
mencoder_ass_defaultstyle =true
# Subtitle colour
# ---------------
# GUI Option: Subtitle colour (string)
# The integer value for the subtitle colour. GUI offers a palette to choose
# from that will generate a number. Default is empty, causing UMS to pick
# white.
# Default: ""
subs_color =
# Style font scale
# ----------------
# GUI Option: Style font scale
# The font scale used for ASS subtitling.
# Default: 1.4
mencoder_ass_scale =
# GUI Option: Styled font outline
# The outline parameter used for ASS subtitling.
# Default: 1
mencoder_ass_outline =
# GUI Option: Styled font shadow
# The shadow parameter used for ASS subtitling.
# Default: 1
mencoder_ass_shadow =
# GUI Option: Styled margin
# The margin used for ASS subtitling.
# Default: 10
mencoder_ass_margin =
# Plain font scale
# ----------------
# GUI Option: Plain font scale
# The subfont text scale parameter used for subtitling without ASS.
# Default: 3
mencoder_noass_scale =
# GUI Option: Plain font outline
# The subfont outline parameter used for subtitling without ASS.
# Default: 1
mencoder_noass_outline =
# GUI Option: Plain font blur
# The subfont blur parameter used for subtitling without ASS.
# Default: 1
mencoder_noass_blur =
# GUI Option: Plain margin
# The subpos parameter used for subtitling without ASS.
# Default: 2
mencoder_noass_subpos =
# DVD/VOB subtitle quality
# ------------------------
# GUI Option: DVD/VOB subtitle quality
# Default: 3
mencoder_vobsub_subtitle_quality =
# Add borders
# -----------
# GUI Option: width
# Default: 0
mencoder_overscan_compensation_width =
# GUI Option: height
# Default: 0
mencoder_overscan_compensation_height =
# ----------------------------------------------------------------------------
# Transcoding Settings Tab: AviSynth/MEncoder Page
# ----------------------------------------------------------------------------
# Enable multithreading
# ---------------------
# GUI Option: Enable multithreading (toggle)
# Whether AviSynth should use multithreading
# Default: false
avisynth_multithreading =
# Enable True Motion motion interpolation via InterFrame
# ---------------------
# GUI Option: Enable True Motion motion interpolation via InterFrame (toggle)
# Whether AviSynth should use InterFrame to insert frames between original
# frames like recent TVs do
# Default: false
avisynth_interframe =
# Enable GPU use with True Motion
# ---------------------
# GUI Option: Enable GPU use with True Motion (toggle)
# Whether InterFrame should use the video card for some of the work
# Default: false
avisynth_interframegpu =
# Enable AviSynth variable framerate change into a constant framerate
# ---------------------
# GUI Option: Enable AviSynth variable framerate change into a constant
# framerate (toggle)
# Pass the flag "convertfps=true" to AviSynth.
# Default: true
avisynth_convertfps =
# AviSynth script
# ---------------------
# The template for the AviSynth script. The script string may contain the
# character "", which will be treated as newline character.
# Default: "<movie><sub>" ( is a new line)
avisynth_script =
# ----------------------------------------------------------------------------
# Transcoding Settings Tab: tsMuxeR Page
# ----------------------------------------------------------------------------
# Force FPS from FFmpeg
# ---------------------
# GUI Option: Force FPS parsed from FFmpeg in the meta file
# Default: true
tsmuxer_forcefps =
# Mux all audio
# -------------
# GUI Option: Mux all audio tracks
# Default: false
tsmuxer_mux_all_audiotracks =
# ----------------------------------------------------------------------------
# Transcoding Settings Tab: FFmpeg Page
# ----------------------------------------------------------------------------
# FFmpeg: Enable multithreading
# ---------------------
# GUI Option: Enable multithreading (toggle)
# Whether FFmpeg should use multithreading
# Default: "", which will use automatic-detection.
ffmpeg_multithreading =
# ----------------------------------------------------------------------------
# Transcoding Settings Tab: AviSynth/FFmpeg Page
# ----------------------------------------------------------------------------
# AviSynth/FFmpeg: Enable multithreading
# ---------------------
# GUI Option: Enable multithreading (toggle)
# Whether AviSynth/FFmpeg should use multithreading
# Default: "", which will use automatic-detection.
ffmpeg_avisynth_multithreading =
# Enable True Motion motion interpolation via InterFrame
# ---------------------
# GUI Option: Enable True Motion motion interpolation via InterFrame (toggle)
# Whether AviSynth should use InterFrame to insert frames between original
# frames like recent TVs do
# Default: false
ffmpeg_avisynth_interframe =
# Enable GPU use with True Motion
# ---------------------
# GUI Option: Enable GPU use with True Motion (toggle)
# Whether InterFrame should use the video card for some of the work
# Default: false
ffmpeg_avisynth_interframegpu =
# Enable AviSynth variable framerate change into a constant framerate
# ---------------------
# GUI Option: Enable AviSynth variable framerate change into a constant
# framerate (toggle)
# Pass the flag "convertfps=true" to AviSynth.
# Default: true
ffmpeg_avisynth_convertfps =
# Audio resampling
# ----------------
# GUI Option: Automatic audio resampling (toggle)
# Default: true
audio_resample =
# ---< Binary tools paths >---------------------------------------------------
# Path to mencoder (absolute or relative from project.binaries.dir)
# Default:
# Win: win32/mencoder.exe
# Mac: osx/mencoder
# Linux: mencoder + system PATH
mencoder_path =
# Path to ffmpeg (absolute or relative from project.binaries.dir)
# Default:
# Win: win32/ffmpeg.exe
# Mac: osx/ffmpeg
# Linux: ffmpeg + system PATH
ffmpeg_path =
# Path to mplayer (absolute or relative from project.binaries.dir)
# Default:
# Win: win32/mplayer.exe
# Mac: osx/mplayer
# Linux: mplayer + system PATH
mplayer_path =
# Path to tsMuxeR (absolute or relative from project.binaries.dir)
# Default:
# Win: win32/tsMuxeR.exe
# Mac: osx/tsMuxeR
# Linux: tsMuxeR + system PATH
tsmuxer_path =
# Path to dcraw (absolute or relative from project.binaries.dir)
# Default:
# Win: win32/dcrawMS.exe
# Mac: osx/dcraw
# Linux: dcraw + system PATH
dcraw_path =
# Path to FLAC (absolute or relative from project.binaries.dir)
# Default:
# Win: win32/flac.exe
# Mac: osx/flac
# Linux: flac + system PATH
flac_path =
# Path to eac3to (absolute or relative from project.binaries.dir)
# Default:
# Win: win32/eac3to/eac3to.exe
eac3to_path =
# Path to VideoLAN (absolute or relative from project.binaries.dir)
# Default:
# Win: videolan/vlc.exe
# Mac: /Applications/VLC.app/Contents/MacOS/VLC
# Linux: vlc + system PATH
vlc_path =
# Path to convert (absolute or relative from project.binaries.dir)
# Default:
# Win: win32/convert.exe
# Mac: osx/convert
# Linux: convert + system PATH
imconvert_path =
# ---< Active - but not settable in GUI >-------------------------------------
# Default: 850
charsetencoding =
# Default: false
transcode_block_multiple_connections =
# Default: true
transcode_keep_first_connection =
# The maximum size (in MB) that UMS should use for buffering audio.
# Default: 100
maxaudiobuffer =
# The minimum size (in MB) that UMS should use for the streaming media buffer.
# Default: 1
minwebbuffer =
# Specify virtual folders allow you to combine real folders into virtual ones
# and give them custom names.
# Example: VFolderName1|Folder1Path,Folder2Path;VFolderName2|Folder1Path
# Default: ""
virtual_folders =
# The location of your virtual folders config file, which contains a
# json-formatted list of virtual folder instructions. See the comment for
# virtual_folders above for an example.
# Example: @vfolders.conf
# Default: ""
vfolders =
# ---< Old deprecated options >-----------------------------------------------
# turbomode = false
# tsmuxer_preremix_ac3 = false
# ---< Other settings saved by UMS >------------------------------------------
alternativeffmpegpath =C:\\Program\\Universal Media Server\\win32\\dvrms\\ffmpeg_MPGMUX.exe
cred.path = C:\\Documents and Settings\\All Users\\UMS\\UMS.cred
external_network = true
engines = pmsencoder,mencoder,avsmencoder,tsmuxer,ffmpegvideo,ffmpegaudio,mplayeraudio,tsmuxeraudio,ffmpegwebvideo,vlcvideo,mencoderwebvideo,mplayervideodump,mplayerwebaudio,vlcaudio,ffmpegdvrmsremux,rawthumbs
dbgpack = channels\\channel.log,C:\\Program\\Universal Media Server\\channels\\channel.log
channels.path = C:\\Program\\Universal Media Server\\channels
pmsencoder.script.directory = C:\\Program\\Universal Media Server\\scripts
cookie.path = C:\\Program\\Universal Media Server\\channels\\data\\cookies
channels.debug = true
channels.subtitles = true
channels.group_folder = false
channels.favorite = true
channels.long_savename = false
channels.oldSub = false
channels.pmsencoder = false
channels.stream_var = false
channels.mpeg2_force=true
channels.net_disc=true
uuid = a6da2984-fada-4271-95ed-6b8bece054af
web.conf:
##########################################################################################################
# #
# WEB.conf: configure support for web feeds and streams #
# #
# NOTE: This file must be placed in the profile directory to work: #
# #
#
http://www.ps3medias...&p=32731#p32731 #
# #
# Supported types: #
# #
# imagefeed, audiofeed, videofeed, audiostream, videostream #
# #
# Format for feeds: #
# #
# type.folders,separated,by,commas=URL #
# #
# Format for streams: #
# #
# type.folders,separated,by,commas=name for audio/video stream,URL,optional thumbnail URL #
# #
# For more web feed/stream options, see: #
# #
#
http://www.ps3medias...&p=37084#p37084 #
#
http://www.ps3medias...&p=46696#p46696 #
# #
##########################################################################################################
# image feeds
imagefeed.Web,Pictures=http://api.flickr.com/services/feeds/photos_public.gne?id=29142919@N07&lang=en-en&format=rss_200
imagefeed.Web,Pictures=http://picasaweb.google.fr/data/feed/base/user/nefuisalbum/albumid/5218433104757705489?alt=rss&kind=photo&hl=en_US
imagefeed.Web,Pictures=http://picasaweb.google.fr/data/feed/base/user/cookiejarconfessionals/albumid/5229065014037788129?alt=rss&kind=photo&hl=en
imagefeed.Web,Pictures,Albums=http://picasaweb.google.com/data/feed/base/user/FenderStratRocker?alt=rss&kind=album&hl=en_US&access=public
# audio feeds
audiofeed.Web,Podcasts=http://podcasts.engadget.com/rss.xml
# video feeds
videofeed.Web,TED=http://feeds.feedburner.com/tedtalks_video
videofeed.Web,The Onion=http://feeds.theonion.com/onionnewsnetwork
# audio streams
audiostream.Web,Radios=Lugna Favoriter,http://mtg-wms.bahnhof.net/lugnafavoriter
audiostream.Web,Radios=Mix Megapol,mms://streaming.sbsradio.se/03872_MixMegapol_mid
audiostream.Web,Radios=NRJ,http://stream-ice.mtgradio.com:8080/nrj
audiostream.Web,Radios=Rockklassiker,mms://streaming.sbsradio.se/03872_Rockklassiker_mid
audiostream.Web,Radios=The Voice,mms://streaming.sbsradio.se/03872_TheVoice_mid
audiostream.Web,Radios=Vinyl 107,mms://streaming.sbsradio.se/03872_Vinyl_mid
audiostream.Web,Radios=P1,http://http-live.sr.se/p1-aac-192
audiostream.Web,Radios=P2 Musik,http://http-live.sr.se/p2musik-aac-192
audiostream.Web,Radios=P3,http://http-live.sr.se/p3-aac-192
audiostream.Web,Radios=P4 Dalarna,http://http-live.sr.se/p4dalarna-mp3-192
audiostream.Web,Radios=P4 Halland,http://http-live.sr.se/p4halland-aac-192
audiostream.Web,Radios=P4 Gävleborg,http://http-live.sr.se/p4gavleborg-aac-192
audiostream.Web,Radios=P4 Göteborg,http://http-live.sr.se/p4goteborg-aac-192
audiostream.Web,Radios=P4 Kronoberg,http://http-live.sr.se/p4kronoberg-aac-192
audiostream.Web,Radios=P4 Kristianstad,http://http-live.sr.se/p4kristanstad-aac-192
audiostream.Web,Radios=P4 Malmö,http://http-live.sr.se/p4malmo-aac-192
audiostream.Web,Radios=P4 Stockholm,http://http-live.sr.se/p4stockholm-aac-192
audiostream.Web,radios=Spotify,http//192.168.0.250:8124,http://http://softwarelint.com/wp-content/uploads/2013/01/spotify-logo.png
# video streams
videostream.Web,TV=France 24,mms://stream1.france24.yacast.net/f24_liveen,http://www.france24.com/en/sites/france24.com.en/themes/france24/logo-fr.png
videostream.Web,TV=BFM TV (French TV),mms://vipmms9.yacast.net/bfm_bfmtv,http://upload.wikimedia.org/wikipedia/en/6/62/BFMTV.png
videostream.Web,Webcams=View of Shanghai Harbour,mmst://www.onedir.com/cam3,http://media-cdn.tripadvisor.com/media/photo-s/00/1d/4b/d8/pudong-from-the-bund.jpg
Prisjakt
Sökningen pågår
Avancerad sökning
4 
.-*- Min Hembio Clan -*-. 
22 filmer
47 bilder
Minhembio - Senaste nyheterna
Anton 
Fler
Vilka bilder visas här?
