Är det någon här som vet om det finns någon PJ-multi kabel som Sony levererar som har en Scart-kontakt i ena änden.
Hittade detta inlägg i en italiensk news grupp. Det är överstt med Altavista, men jag tolkar det som om det skull kunna funka. Vad tror ni?
quote:Hello to all, finally I have resolved the problem and of continuation I want to share the solution. I hope that these aids many of we are not made to rob from the Sony with its sordidi cables for this pj, than, for of piu ', are also limits to you to 5mt of length.
Here the directory of the pins of the pjmulti:
1 nc
2 nc
3 nc
4 Audio - R
5 Blue (B-Y)
6 GND
7 GND
8 Audio - L
9 Green (G-Y)
10 GND
11 GND
12 H
13 Red (R-Y)
14 nc
15 GND
16 V
17 nc
18 nc
19 Y
20 DDC SCL
21 GND
22 nc
23 C
24 DDC return
25 GND
26 nc
27 C-video
28 DDC SDA
29 GND
30 nc
31 nc
32 nc
the order of the pins, watching the connector from the side in which the cables are threaded, e' following:
31-29-27............... 5-3-1
32-30-28............... 6-4-2
My council e' makes an adapter, perche' the implantation system cables to perforation of present insulator on pj- the fines ago si' that cables of truly infinitesimale section can be threaded, for which the fatevi adapter, as an example pjmulti < - > vga or pjmulti < - > 5bnc, holding it the piu' short possible, and then cables of length and qualita' to pleasure. You keep in mind who the cables uses you from the Sony is of this type: http://www.ltkcable....LTK_p_20379.htm
If you want to send marks them RGB from dvd or receiver to satellitare (15k RGB), you keep in mind who the piedino to use on pjmulti for the Sync e' the 12 (H sync) on which you can connect the composite video of the source.
Not used pin the 29 like GND, while you can use to it appeal to to all the other GND that are connected between of they to the inside of the pj.
All the cio' e' fruit of many trying to you gone badly to the term of which succeeding is an adapter pjmulti - scart that a pjmulti < - > vga that is successful < > to construct with e' what I am using currently. The connector, unavailable, e' obviously that one detached from sordido the cable pjmulti-composite in equipment to the cineza.
The last note e' instead turned to VIDEOTECNICA that e' INVENTED of healthy leaves the possibilita' of regulating singularly Red, Green and Blue on this floodlight approaching the service menu: you know simply that NOT e' true and that on the service menu (enter, enter, up, down, enter) e' not there practically null of piu ', as far as regulation image, regarding the user menu.
A salutone to all
" to share the wealth "
byez
Jag tar det italienska originalet också fall någon är slängd på det.
quote:
Ciao a tutti,
finalmente ho risolto il problema e di seguito
voglio condividere la soluzione.
Spero che questo aiuti tanti di noi a non farsi rapinare
dalla Sony coi suoi sordidi cavi per questo pj, che, per di piu', sono
anche limitati a 5mt di lunghezza.
Ecco l'elenco dei pins del pjmulti:
1 nc
2 nc
3 nc
4 Audio - R
5 Blue (B-Y)
6 GND
7 GND
8 Audio - L
9 Green (G-Y)
10 GND
11 GND
12 H
13 Red (R-Y)
14 nc
15 GND
16 V
17 nc
18 nc
19 Y
20 DDC SCL
21 GND
22 nc
23 C
24 DDC return
25 GND
26 nc
27 C-video
28 DDC SDA
29 GND
30 nc
31 nc
32 nc
l'ordine dei pins, guardando il connettore dal lato in cui si infilano
i cavi, e' il seguente:
31-29-27 ...............5-3-1
32-30-28 ...............6-4-2
Il mio consiglio e' di farsi un adattatore, perche' il sistema di
fissaggio cavi a perforazione di isolante presente sul pj- multi fa
si' che si possano infilare cavetti di sezione veramente
infinitesimale, per cui fatevi l'adattatore , per esempio
pjmulti<->vga oppure pjmulti<->5bnc,tenendolo il piu' corto possibile,
e poi cavi di lunghezza e qualita' a piacere.
Tenete presente che i cavi utilizzati dalla Sony
sono di questo tipo:
http://www.ltkcable....LTK_p_20379.htm
Se volete mandare un segnale RGB da dvd o ricevitore satellitare (15k
RGB), tenete presente che il piedino da usare sul pjmulti per il Sync
e' il 12 (H sync) su cui potete connettere il
composite video della sorgente.
NON usate il pin 29 come GND, mentre potete usare a piacere tutti gli
altri GND che sono connessi tra di loro all'interno del pj.
Tutto cio' e' il frutto di molti tentativi andati
male al termine dei quali sono riuscito a costruire con successo sia
un adattatore pjmulti<->scart che uno pjmulti<- >vga che e' quello che
sto usando attualmente.
Il connettore, introvabile, e' ovviamente quello
staccato dal sordido cavo pjmulti-composite in
dotazione al cineza.
L'ultima nota e' invece rivolta a VIDEOTECNICA
che si e' INVENTATA di sana pianta la possibilita' di regolare
singolarmente Rosso, Verde e Blu su questo proiettore accedendo al
service menu: sappiate semplicemente che NON e' vero e che sul service
menu (enter, enter,up,down,enter) non c'e' praticamente nulla di piu',
quanto a regolazione immagine, rispetto allo user menu.
Un salutone a tutti
"share the wealth"
byez
elche99