Hejsan Joakim,
Vi fungerar ju alla olika. En del kan inte acceptera (eller hantera) att något de inte förstår eller inte redan vet skulle kunna vara sant utan de ser ny information som ett hot, sluter ögonen, stoppar fingrarna i öronen och mumlar la la la la la... tills "hotet" har försvunnit

Denna typ av individer har väl inte direkt bidragit till människans utveckling genom tiderna utan snarare sett till att vi inte har kommit längre...
Som tur är så existerar alltid några som inser att "ju mer man vet, desto mer vet man att man inte vet" samt att "frånvaro av bevis inte är bevis på frånvaro".
Så trots mitt första inlägg gav jag mig ut på jakt efter någon slags information som skulle kunna kasta lite ljus på detta fenomen. Jag tror trots allt inte att Nordost bara hugger ett visst mått ur luften utan att det baseras på någon slags teoretisk tanke (riktig eller felaktig är ointressant just nu, men åtminstone en tanke).
Jag började med att väcka en polare som bor i Asien och som är en bra källa att ösa ur. Förutom att han är fysiker så jobbar han som specialist inom radio och transmission. Han är också totalt ointresserad av musik vilket är bra då han inte har några känslomässiga aspekter åt det ena eller andra hållet.
Han började med att (med en något avundsjuk ton) påpeka att "om ditt största problem just nu är om en interconnect skall vara 60 eller 100 cm så måste du leva ett lyckligt liv", haha
Han var trött, jag var trött, men han mumlade i alla fall något om att det måste ha att göra med kabelns induktans, kapacitans, bandbredd och den "antennverkan" den har som alla beror av längden och där kortast inte automatiskt är bäst. Beroende på applikation så anpassas därför längden på interconnects så att de fungerar så bra som möjligt tillsammans med övriga kretsar. Teoretiskt borde detta gälla även ljudsystem men om eventuella skillnader skulle kunna detekteras genom mänskliga sinnen hade han ingen aning om (och kunde inte heller dölja att han fullständigt gav blanka &#@!* i detta)

.
Med den nya informationen så letade jag runt en lång tid på nätet och efter många om och men så lyckades jag hitta följande text.
(Skulle du Joakim ha möjlighet att kolla med din polare på Nordost om detta är i linje med deras teorier, och kanske be dom förklara lite närmare hur dom har räknat på sina kablar?)
The Role of Inductance and Capacitance in Audio Interconnects
Inductance and capacitance need to be carefully controlled in interconnect. Too much or too little of either characteristic will provide undesirable results. Flat interconnects, coaxial interconnects, and twisted pair interconnects exhibit electrical characteristics that are not in the best interest of music for several reasons. In lengths suitable for most home audio systems, these interconnects have too much bandwidth for audio applications and are particularly subject to noise infiltration. Another problem is the point at which these interconnects achieve electrical resonance; i.e., the point at which inductive reactance equals capacitive reactance.But interconnects with extremely wide bandwidth create a thinner and brighter sound than interconnects with less bandwidth.
The Role of Group Delay in Interconnect Design
The propagation speed of frequencies will be delayed to one degree or another in any interconnect. The critical concept regarding propagation speed in interconnects designed for audio applications is that all frequencies should be delayed for the same amount of time (uniform group delay). This means that if different frequencies enter the interconnect at the same time, they should leave the interconnect at the same time.
Wide bandwidth and extremely fast propagation speeds usually go hand in hand. The inductance of interconnects with less bandwidth is usually sufficient to reduce overall propagation speed, but if the interconnects are designed properly, the delay in these interconnects should be uniform over the usable bandwidth of the interconnect.
The Effect of Interconnect Length on Bandwidth and Resonance
An extremely short interconnect will have wider bandwidth than a longer interconnect of the same type because the shorter interconnect will have less inductance and capacitance. Extremely wide bandwidth interconnects are subject to noise infiltration and resonant behavior and sonic byproducts that do not serve music. Extremely short interconnects will sound more alike than they will sound different because of their similar bandwidth and resonant characteristics. In our opinion, they will tend to transfer an audio signal so that it is more like a hifi experience than it is a musical experience.
Contrary to popular opinion then, shorter is not necessarily better from a musical standpoint. A longer interconnect will tend to sound less bright and fuller because it will have more inductance and hence less bandwidth and a lower resonant point than a shorter interconnect.
The same sonic pitfalls that apply to the "shorter is better" perspective, also apply to "Interconnect Comparator" tests. From an electrical perspective the interconnect comparator behaves like an extremely short piece of interconnect. In other words, the interconnect comparator will have extremely wide bandwidth and will have a relatively high resonant point. A typical interconnect without a network will most closely resemble the electrical characteristics of the interconnect comparator than will a interconnect with a properly designed network. It also follows that the shorter the piece of interconnect, the more it will resemble the sound of the comparator. The basic premise of this comparison is based upon an assumption that a short interconnect is better from a musical performance perspective which as we have discussed earlier, is not the case at least from the point of view of our extensive tests and listening.
The Ideal Interconnect Length for Audio Applications
There is, in fact, an ideal length for any type of interconnect which will establish the proper relationship between capacitance and inductance; i. e., ideal bandwidth and a resonant point that is as low as possible for the application. If this specific "ideal" length of interconnect is compensated properly in its natural roll-off region with a network, it will exhibit very uniform group delay characteristics throughout its entire usable bandwidth; i.e., phase, imaging, timing of harmonics to fundamentals, etc. will be true to the source.
I övrigt så har jag mina tvivel när det gäller hur blindtesten egentligen var ordnad och hur den gick till

men det får jag återkomma till någon annan gång.
Nej, klockan är 0600 och jag ska upp om två timmar. Natti natti
Redigerat av Tomas_D700, 17 December 2003 - 05:58.