[g3n3ral]

• 0

En sak som jag verkligen skulle behöva hjälp med, hur ändrar man kanalplats? Nu ligger tex. TV4 på kanalplats ett osv..

[22mc]

• 0

Är väl bara att dra och släppa i channel editor ?

[CallMeNobody]

• 0

Jag kom senare på att de flesta kanalerna sänds från europa, så det vara bara att utöka sökningen lite

[g3n3ral]

• 0

Är väl bara att dra och släppa i channel editor ?

Det stämmer, var bara att göra så.Jag listade ut detta precis efter att jag ställt frågan här.

[danton1]

• 0

Hur katten får man flera dagars epg till canal digital i DVBviewer Pro?

Mvh/Danton

[HebbeT]

• 0

Ställ dig på kanalen Comedy Central.

/Kjell

[22mc]

• 0

eller välj extern epg och grabba från dagenstv.com

[pb81]

• 0

Tjena!
Något som fått EPG att fungera på TV1000 nu efter de bytt namn till viasat film (vfilm)?
Är det fortfarande transponder 10862v och 11872v man skall använda för canala digital och viasat?

[HebbeT]

• 0

Vet inte hur det är med Viasat men för CD använder jag 10872V.

[ssoep]

• 0

Hej!

Kör CD men HD kanalerna funkar inte längre.
Hur har ni andra det?
I somras fungerade de men sen försvann de en efter en, har provat alla möjliga codecar utan resultat.
Först började de lagga sen blev det sämre, alla andra kanaler funker fint.

[ssoep]

• 0

Tankade ner nya ini listan och körde kanalsök.
Nu får jag i allla fall in kanalerna men de funkar inge vidare, låsningar och vissa hackar.
Någon som har tips på codec som funkar?

[Lasse-hatten]

• 0

Jag har tänkt bygga ny HTPC baserad på Asus E45M1-I Deluxe, men sen såg jag att DVBViewer "kräver" en processor på 1,7GHz och vill gärna ha 2,0, medan E-450 bara har 1,65GHz. Är det någon som kör/har testat på ovannämnda kort, och kan dela med sig av sina åsikter?

[ssoep]

• 0

Ingen aning egentligen.
Men DVB är troligen i grunden mpc classic, jag har aldrig märk att DVB kräver någon överdriven processorkraft.
Jag har kört med DVB sen flera år tillbaka och kan inte tänka mig att din dator inte klarar av det.
DVB är ett program som jag inte ångrar att jag lade några kronor på, köprekommendation från mig iaf.

Redigerat av ssoep, 31 augusti 2012 - 21:56.

[Unregisteredc96d6be8]

• 0

Jag har tänkt bygga ny HTPC baserad på Asus E45M1-I Deluxe, men sen såg jag att DVBViewer "kräver" en processor på 1,7GHz och vill gärna ha 2,0, medan E-450 bara har 1,65GHz. Är det någon som kör/har testat på ovannämnda kort, och kan dela med sig av sina åsikter?

Tänk på att E-450 är dualcore så det bör inte bli problem, körde på en P4 1,7 och det funkar. Använder du sen en codec med stöd för dxva så blir det inga problem alls

[Lasse-hatten]

• 0

Ingen aning egentligen.
Men DVB är troligen i grunden mpc classic, jag har aldrig märk att DVB kräver någon överdriven processorkraft.
Jag har kört med DVB sen flera år tillbaka och kan inte tänka mig att din dator inte klarar av det.
DVB är ett program som jag inte ångrar att jag lade några kronor på, köprekommendation från mig iaf.

Köpa behöver jag inte göra, jag har använt det sedan Sverige digitaliserades, när det nu var. Datorn jag använder var gammal redan då, men det har fungerat bra fram till nu, när jag vill kunna få in HD-kanaler också. Processorn i den nuvarande datorn är en AMD Athlon XP 2200+, och jag använder "datorns" inbyggda grafikkort. Jag får in danska HD-kanaler, men det går lite knackigt emellanåt.

[Lasse-hatten]

• 0

Tänk på att E-450 är dualcore så det bör inte bli problem, körde på en P4 1,7 och det funkar. Använder du sen en codec med stöd för dxva så blir det inga problem alls

Tack! Du måste ha svarat samtidigt som jag skrev mitt, så jag såg det inte förrän nu.
Bara en fråga till (hoppas jag), jag behöver en DVB-T2mottagare, men t.ex. Hauppauges Nanostick 290e vill ju ha en 2,6GHz multi core processor, hur fixar jag det?

[Unregisteredc96d6be8]

• 0

Tack! Du måste ha svarat samtidigt som jag skrev mitt, så jag såg det inte förrän nu.
Bara en fråga till (hoppas jag), jag behöver en DVB-T2mottagare, men t.ex. Hauppauges Nanostick 290e vill ju ha en 2,6GHz multi core processor, hur fixar jag det?

Ingen aning faktiskt har ett anysee E7 kort för dvb-t2 och kör det på en dualcore 2,4 har jag för mig, dock med dvblink och till mce, alternativt Mediaportal och där har det inte varit något problem. Kommer dock inte ihåg vad anysee kräver

[22mc]

• 0

This is a PVR for the DVBViewer Recording Service based on the Vu+ add-on by jdembski, so all credits must go to him. For Windows, you'll need a XBMC Frodo Nightly Build.

Notes:

- Timers are disabled. I got them working but there are some bugs I need to polish before the next release.


Download

Patch against the development branch from https://github.com/m...-pvr-addons.git

http://forum.xbmc.or....php?tid=140645

[22mc]

• 0

Någon som kör xbmc pvr mot Dvbviewer RS och kan berätta lite hur det upplevs?

[LiMiT]

• 0

DVBViewer v5.0 har släppts.

[menhallå]

• 0

Jag köpte DVBViewer 2006... Tror ni jag måste köpa en ny licens?
Programmet har funkat skitbra så om det är ett måste så får det nog bli DVBViewer igen.
Har precis uppdaterat till Win7 på TV-servern. Ska bara få mina gamla FireDTV-kort att funka också...

[LiMiT]

• 0

Det skall du inte behöva göra, dock har de bytt licenssystem så du måste nog kontakta dem för att få en ny licensfil.

[menhallå]

• 0

Ok, skickade ett mejl och ser först.

[menhallå]

• 0

Japp, fick mejl från Hackbart med nytt lösen, bara att ladda ner. Köpte programmet 2006 och fortfarande bara att ladda ner! Säg det till Bill Gates...

Nu gäller det bara att få igång det. Brukar vara lite trixit. Digital Everywhere's program funkade direkt. DVBViewer hittar mina FireDTV:er men säger ändå "No hardware found".

[LiMiT]

• 0

Prova att göra en ny "hardware scan" - vet att det strulade för mig också (i v5.0), men efter jag tryckt på "Scan for hardware" så lirade det fint.

[menhallå]

• 0

Äh, det var bara att starta om datorn... räckte inte att starta om programmet.
Men nu vill inte kodade kanaler funka. Funkar i DigitalEverywhere men inte i DVBV.
Någon checkbox jag missat?

Har också SmartWi. Måste man installera program i datorn för att få SwartWi att funka?

EDIT: Nä, nu funkar kodade kanaler i DVBV också! Eftersom jag nu bara har ett boxerkort och 2 FireDTV så kanske det var fel mottagare innan(?). Måste få igång SmartWi igen.

EDIT2: Nu funkar SmartWi också... Jag flyttade runt korten och tryckte av misstag in ett SmartWi kort i SmartWi lådan. Och då funkade det! Det kanske är så man skall göra? För att aktivera korten? Hehe! Där hade jag tur.

Redigerat av menhallå, 30 december 2012 - 22:22.

[LiMiT]

• 0

DVBViewer v5.1 släppt:

Changelog DVBViewer Pro 5.1



General

Fix: Playback: Playback of m2ts files with the DVBSource Filter didn't work.
Fix: Main Window: Zoom 75% fixed.
Fix: OSD: The screen saver was not disabled for slide shows.
Fix: Timeshift: Fixed problems with timeshift for some channels.
Fix: OSD: Image files with an UNC path were not shown.
Fix: Tweaker.ini: The OSD Enable Tweak was missing.
Change: Main Menu: Removed the Help entry.
Change: Main Menu: Renamed the "Wiki" entry to “Online Help”.
Change: Main Window: Auto Best Width defaults to enabled now.
Fix: Recoding Window: The timer status changes were not shown correctly.
Change: RTSP Device: 127.0.0.1 was not included in the SSDP search for SAT>IP servers.
Fix: Options Window: Fixed problems with missing labels on reopening this window.
Change: Options/Input: Changed the behavior of the “Learn” button.
Add: Recording Options: Added an option to record the Current Now/Next EIT EPG data stream.
Fix: Unicast Device Setup Window: The buffer count could not be adjusted.
Add: ActionIDs: Added ActionID 135 for Close Graph.
Fix: VCR: If a changed PMT PID was detected while recording the recording was restarted in an endless loop.
Fix: VCR: TS audio only recordings with more than one audio stream sometimes an audio stream was wrongly detected as PCR stream.
Fix: PMT-Parser: If the Service ID was set to 0 it was wrongly detected as PID 16.
Fix: PMT-Parser: The PMT parser used a wrong PID for non ATSC audio streams with the ID $81.
Update: DVBSource filter 3.7.

Channel Logos

It is now possible to assign a logo to a channel with the help of the "channellogos.ini" file. The DVBViewer first checks if an entry for a channel is found in this file. If it isn't found it tries the old method (guessing).

The format of the channellogos.ini file is quite simple:

EPGChannelID]
c=[Channelname} (UTF-8 encoded)
logo=[LogoFilename]
The “c=” entry exists for an improved readability the program just ignores it.
If a logo can't be found or doesn't exist it is marked with
logo=-
This avoids repeating and failing the search over and over again.

Recording Service

Fix: Service Options: The test button showed the XML answer of the request.
Fix: Service Options: “Ignore local recording list” is now ignored if the RS support is deactivated.
Change: Service Support: The MAC of the Recording Service PC (needed for WOL) is now updated on every DVBViewer start.
Fix: Service Setup Wizard: Fixed problem with empty password.
Fix: Service Options: Fixed problem with empty password.
Fix: Fixed unnecessary memory consumption for downloading data from the RS.

Hardware

Change: BDA Hardware Detection: The DVB-S2 flag is now set for unknown DVB-S Devices.
Fix: Hardware Options: The display wasn't updated correctly if no hardware entries were present.
Add: HardwareDB: Support for Technotrend TT-budget CT2-4500 CI and Technotrend TT-connect CT2-4650 CI.
Fix: Hardware/Sundtek/HDHomerun: Added a signal strength query directly after tuning.
Add: HardwareDB: Support for DVBSky S680, DVBSky S960 and DigitalDevices Cine S2 V6.5.

Subtitles

Add: MPEG/Subtitles: Support for subtitles in MPEG files added.
Fix: The “show subtitles automatically” option didn't work under certain circumstances.
Fix: DVB Subtitle: Switching between different languages didn't work.
Change: OSD Subtitle: The OSD subtitle display is now cleared on channel / subtitle stream changes.
Change: Options/TTX Subtitle: Changed the default font size to 24 point.

EPG

Change: EPG Parser: The EPG Parser doesn't delete CRLF in the description text anymore.
Change: EPG Processing: The language tag of the EIT EPG is now ignored if only one language is present.
Fix: EPG-Export to HTML: Fixed problems with non ANSI channel names.
Change: EPG Window: Unnecessary updates of the details display removed.
Add: EPG: Tweak to force EPG without character set information to be recognized as ISO6937 encoded.
Fix: EPG-Parser: Fixed missing last character for UTF-8 encoded EPG.

Internal Task Scheduler

Fix: The tasks were not created in the correct order.
Fix: Fixed different defaults for the LeadTime setting.
Fix: The “-i” command line parameter was not detected correctly.
Fix: Running recordings are now deleted from the task list.
Fix: Synchronizing the task list on DVBViewer start.
Fix: Empty parameter didn't work.
Fix: Timer with the same start time result now in only one entry in the task list.

Streaming Playback

Add: Ability to use the LAV Source Filter. By adding a "lav_" before an URL the Lav Splitter will be used instead of the own Vod Filter.

VOD Source Filter

Fix: Streaming Thread reading problem. Several Splitters tried to read "behind" a file which caused an endless loop inside the reading thread
Fix: Exception inside GetMediaType, if no PAMMediaType is provided
Fix: UserAgent changed to allow playback of HbbTV content

Shaders

Fix: the Bilinear Hardware Filter is disabled if you use a resample filter. To do so you have to set the ManualResample variable inside the shader script
Add: Lanczos 3 and 12, Bicubic, resample shader
Add: Several new Shader effects, like Old TV.
Add: Stereo 3D Left/Right to Up/Down converter, which is required for several 3D glasses like Zeiss Cinemizer OLED.
Change: Shaders have been renamed and sorted into Stereo, Effect and Resample categories.

[LiMiT]

• 0

DVBViewer v5.2.7 släppt:

DVBViewer Pro 5.2.7

In Memoriam - Lars Gehre

Changelog

General

Add: HbbTV: COM Interface to load customized websites via Plugin:

Interface: IHbbTV = interface(IDispatch)

Description: The IHbbTV interfaces allows to load and display HTML websites inside the DVBViewer.

Methods: procedure LoadInBrowser(const Url: WideString; IsHbbtv: WordBool); safecall;

Properties: property Available: WordBool;
property Visible: WordBool;

Change: MHEG-5: handling is now similar to HbbTV. You find a Mheg-Item inside the OSD Home-Menu which starts the MHEG window. OSD Close turns it off, which allows you to use the regular OSD even if MHEG is started.

Fix: HbbTV: HbbTV did not worked properly on several (e.g. virtual) machines, caused by timing related issues of webkit.

Add: HbbTV: AIT Parser now supports Simple application boundary descriptor

Add: HbbTV: Proxy can be used by a tweak

Fix: VirtualTreeview 5.0.1 used since screen reader support was broken

Fix: HbbTV: rewrite to avoid browser multithreading related problems

Add: HbbTV/MHEG5: Tweaks to disable both engines separately

Add: HbbTV/MHEG5: Zoom and stretch values in full screen mode are used for video display

Add: HbbTV/MHEG5: Can be disabled by a tweak

Fix: HbbTV: In passive mode the page is loaded only after the browser is opened and not automatically in background.

Removed: Exit Action (12294)

Add: HbbTV: Channel +/- does now simulate TAB resp. Shift+TAB key press for better handling of websites who do not work fine with cursor keys

Changed: OSD: Incremented revision number of the windowdef.xml

Hardware

Add: Support for DVBSky DVB-T2/C hybrid tuner, no CI

Fix: HDHomeRun/Sundtek and other Network Devices devices now work again

Fix: Tuning with EMPIA based DVB-C USB devices if “Force Auto-modulation” is switched off.

Add: Support for multiple tbsCIapi.DLLs. If you use more than one CI in combination with more than one TBS card you should create additonal tbsCIapi's starting with tbsCIapi1.dll up to tbsCIapin.dll



There are a couple of changes concerning the HbbTV/MHEG5 Plugins, so if you wonder what this is, you should have a look in here.

Lars Gehre (programmerare för recording service bl.a) har hastigt gått bort, därav "In memoriam".

[Harleystroker]

• 0

?.

Redigerat av Harleystroker, 06 september 2013 - 15:45.

[LiMiT]

• 0

DVBViewer v5.2.8 ute.

DVBViewer Pro 5.2.8

In Memoriam - Lars Gehre

Changelog



General

Change: TS Playback: The package size is now detected more accurate
Fix: COM: The Interface IHbbTV is now located under the DVBViewer3 Interface
Fix: Vod Source: Obviously wrong HbbTV-urls are not repaired
Change: COM-Interface: HbbTV Interface is now moved to a new IDVBViewer3 Interface
Add: COM-Interface: new OSD2 interface with Showpopup2 function
Change: TS Playback with DVBSource: The TS packet size is now detected automatically. Previously DVBViewer only relied on the file extension (.ts, .m2ts).
Fix: TS Playback with DVBSource: Under certain (rare) circumstances video wasn't detected in TS files.
Change: File/Stream Playback without DVBSource: Enhanced aspect ratio detection, particularly on-the-fly changes (depending on the video decoder).
Fix: Stream Playback: A splitter name specified in a filtergraph preset wasn't assigned to the splitter and didn't show up under View -> Filters
Add: File/Stream Playback: Presets are now shown under View -> Filters
Add: Scanner: Widestring support in channel scan, same like in the GE
Fix: Playback: support for <=L2000 WMV DRM via wmvdrm.dll:
__stdcall HRESULT WMCreateCompanyCertificate(IUnknown **pUnkCert; GUID *Company);
Fix: VodSource: Test für Content-Range if the server does not return the proper file size (e.g. DR dk)
Change: General code cleanup
Add: Options: Channel Logo editor under options
Change: Options: Former "Is DVB-S2 device" checkbox replaced by a DVB-S2 / DVB-T2 checkbox that is now located above the tuner type dropdown list.
Add: Channel Editor: DVB-T2 checkbox, Substream ID checkbox and Substream ID input field for DVB-T/T2 channels. Please note: Channels that are flagged as DVB-T2 require a tuner that is flagged as DVB-T2 capable

Hardware

Change: DVBSky: Disabled PMT Polling if no CAM is available
Add: Terratec H7/S7: Support for CAM and DiSEqC
Add: Started implementing the DVB-T2 support
Fix: Source IP only partly checked on IPTV transponder comparison

EPG

Fix: fix for problems with diacritic char sets

HbbTV

Fix: HbbTV: The automatic translation is disabled for the browser list
Fix: HbbTV: Some providers send wrong URIs for their videos, they are now repaired before playback starts
Fix: HbbTV: ACTION_DVD_MENU does not open HbbTV anymore
Fix: HbbTV: The automatic translation is disabled for the browser list
Fix: HbbTV: Some providers send wrong URIs for their videos, they are now repaired before playback starts
Add: MHEG-5: new engine build which required changes in the interface
Fix: HbbTV: partially rewrite of the html loader, if an application/ce-html+xml or application/vnd.HbbTV.xhtml+xml is used. ZDF should run fine as well as Mediathek
Fix: HbbTV: the window ignored the Close OSD on Video playback setting
Fix: HbbTV: content is stored in the cache-subfolder
Fix: HbbTV: https urls now also work fine if the MIME type application/vnd.HbbTV.xhtml+xml is used
Fix: HbbTV: The window cleared a background while loading a video, which caused removed background textures on some skins
Fix: HbbTV: created a dummy KeyEvent Object, used on several sites (e.g. LokalTV)
Change: HbbTV: new HbbTV.xml file for configuration and auto update located under http://www.dvbviewer.tv/hbbtv.xml
Fix: HbbTV: Debug Window did not worked, caused by the Popupblocker

Redigerat av LiMiT, 14 september 2013 - 10:09.

[LiMiT]

• 0

DVBViewer v5.2.9 ute:

ATTENTION: You can download the DVBViewer Pro 5.2.9 only from https://www.dvbviewer.tv/members/

We introduced in 2010 a new protection system with Version 4.5, if you haven't already got the new user credentials please read also: http://www.dvbviewer...ew-credentials/

DVBViewer Pro 5.2.9
In Memoriam - Lars Gehre

Changelog


General

Add: Main Window: Resizing by dragging the edges keeps the aspect ratio of the video display area. Dragging the corners works as before.

Change: Main Window: The window sticks to the screen edges when it is resized with the mouse wheel.

Fix: Main and GUI Skin Window: Aero snap is prevented while resizing

Add: Main and GUI Skin Window: Snapping to the desktop edges under Windows Vista / 7, issues when moving the napped window are solved.

Add: GUI Skin Window: Resizing by dragging the lower right corner and holding the shift key down keeps the aspect ratio of the video display area. Dragging without shift key works as before.

Fix: GUI Skin Window: Resizing with the mouse wheel invisibly changed the size of the main window

Fix: DVBViewer Windows (general): Keyboard shortcuts like Ctrl+A, Ctrl+C etc. disabled using them for standard functions (Select All, Copy...) in focused input fields

Fix: Channel List: Auto-scroll did not work when expanding a node.

Fix: Channel Editor: The return key didn't start the search function.

Fix: Scanner: The scanner didn't read ATSC Clear QAM channels correctly, thus creating "Service XXX" entries to which no EPG data could be assigned.

Fix: Timeshift: Timeshift files weren't written correctly after selection of ATSC subtitles

Fix: Timer Recordings Window: The Special Action -> Transponder Dump option didn't work.

Fix: Timer Recordings Window: An incomplete input in the start/end time fields disabled using most other control elements.

Add: Timer Recordings Window: Carry from minutes to hours and from hours to the date when exceeding 0 minutes/hours in the start/end time field.

Fix: Instance Management: Bug causing a resource leak under Windows 7 and preventing Tweaker.exe from detecting that DVBViewer Pro is running.

Fix: Instance Management: A second DVBViewer instance accessing the same configuration folder could be launched by using "as administrator".

Change: Browser: Enhanced default browser detection by using a new method (applies to EPG Internet search function and teletext URLs). A per-user browser selection now takes preference over global Windows settings.

Change: Database: dbconvert.exe isn't launched automatically anymore when DVBViewer is launched (only required when updating from DVBViewer Pro 4.3 or earlier, has to be performed manually now for converting the database to the new format).

Change: Teletext-Window: Start page input field for teletext search function removed (the start page can be selected directly as well).

Fix: Teletext-Window: The "Match whole word" option for the teletext search function was reversed (previously unchecked = whole word, now checked = whole word).

Fix: Setup: The setup.xml was written twice when DVBViewer was closed, causing the setup.bak to be a copy of the current instead of the previous setup.

Change: Setup: If an xml file can't be loaded because it is corrupted or not present, DVBViewer recreates it by copying the content of the according .bak file (if available).

Fix: KeyTool: Without a previously used key the key file selection was not displayed as intended

Update: Tweaker.exe to version 1.0.4

Update: DVBViewer Filter to version 3.8.0

EPG

Fix: Tweaks: The tweak that was supposed to let DVBViewer assume ISO 6937 character coding didn't work correctly.

Fix: EPG Character Set: Wrong EPG character set selection under certain circumstances.

Change: EPG Character Coding: The setup doesn't contain the file Huffman.dll anymore because it has been integrated in DVBViewer.

Fix: EPG Internet Search: The internet search in the EPG Window failed on some sites if the search item contained non-ASCII characters (e.g. umlauts). Please copy the new EPG_URLList.ini file from the installation directory to the configuration folder. It contains additional entries indicating if UTF-8 character coding must be applied for a site.

Fix: EPG Window: Numerous TV Guide issues fixed.

Fix: EPG Window: An incomplete time input in the time bar disabled using most other control elements.

Add: EPG Window: Carry from minutes to hours and from hours to the date when exceeding 0 minutes/hours in the time bar.

Fix: EPG Window: The date selection in the time bar was limited to 7 seven days ahead.

Hardware

Fix: Hardware Options: If two or more equivalent free devices in the hardware list were set to "Preferred" DVBViewer selected the last instead the first one.

Fix: Hardware Options: Sorting the device list with drag & drop followed by OK/Apply caused a memory leak and possibly access violations.

Fix: Hardware Options: Canceling OK/Apply due to an ongoing recording caused a memory leak and possibly access violations.

Fix: Hardware Options: Useless "Rebuild Graph" on file playback after OK/Apply removed.

Add: Hardware Options: "Last Channel" is performed automatically if OK/Apply interrupts TV/Radio playback.

Fix: CI/CAM: Dynamic PMT changes of scrambled channels didn't work with Digital Devices cards

Fix: RTSP Device: A longer lasting RTSP tuning process could let the SAT>IP server stop the stream for other active RTSP devices in the same application because „still alive” messages were sent too late.

Fix: RTSP Device: Channel redirection didn't work as intended and caused an RTSP device to block for some time (only applies if the Recording Server is the RTSP server).

Change: RTSP Device: Code restructured in order to make it less error prone.

Playback

Add: Playback: Support for HEVC video. Requires DVBViewer Filter 3.8.0 and LAV Filters 0.59 or later.

Add: Playback: Support for AES3 audio. Requires DVBViewer Filter 3.8.0 and LAV Filters 0.58 or later.

Add: DirectX Options: HEVC decoder selection

Fix: Zoom: Under certain circumstances the video resolution was detected as 0 x 0 causing the View → Zoom 25%...200% functions in the context menu of the main window to set it to zero size.

Change: Picture in Picture: Code cleanup.

Fix: RDS: The accidental activation of RASS picture reception caused occasional beeps or saving of pictures in the configuration folder\images subdirectory when playing certain German radio stations.

Fix: VOD Source Filter: URL detection for Vimeo. Links work again.

Fix: Tweaks: Wrong default for "Use EVR Video Processor" option.

OSD

Fix: OSD Volume Bar: After 24 days without rebooting the PC the volume bar remained endlessly on screen.

Fix: OSD Help: The OSD menu timeout was unintentionally applied to the OSD help pages.

Fix: OSD Timeline: After entering a channel / favourite number the according channel entry wasn't marked / selected correctly in the OSD timeline.

Fix: OSD Menu: Moving the mouse within the video display area removed the focus from the currently selected OSD menu item, so OSD OK had to be pressed twice for selection.

Fix: OSD Default Skin: Dialogs didn't perform "page down" on first arrow down key press.

Fix: OSD Popup Windows: Closing DVBViewer with open OSD popup window (help or EPG details) caused an access violation.

Fix: Subtitles: Subtitles remained on screen when performing "Close Graph" while they were displayed.

Fix: Subtitles: Teletext subtitles didn't disappear immediately when switched off.

Fix: Digger Game: Small memory leak after the first level with enemies

HbbTV

Fix: HbbTV: Redirection of websites didn't work reliably

Fix: HbbTV: The AIT Parser didn't write the AIT links to the debug.log and COM DataManager.

[LiMiT]

• 0

v5.3.0 ute.