Bandwidth calculation for the serverJag har en server som står och snurrar 24/7 och den skulle vi ev. kunna köra Teamspeak på. Har 100mbit fiber. Vet dock inte vilken "impact" det får på mitt eget spelande, bandbredd etc. om c:a 20-30 pers använder TS-servern?
Du får gärna sätta ihop en tutorial hur man görJag lyckas då inte träffa ett skit med den!
We'll divide this into several examples which hopeful explain the calculation somewhat better. The first is a simple example we'll explain a little bit more in detail. For each example we use the following syntax:
DOWN: people_speaking_atm * selected_codec
UP: people_speaking_atm * (people_in_channel - 1) * selected_codec
The following would be a server with one channel set to Speex 25.9, 10 people in the only channel and one person is speaking:
DOWN: 1 * 25.9 Kbit/s = 25.9 Kbit/s
UP: 1 * (10 - 1) * 25.9 Kbit/s = 233.1 Kbit/s
As you see in this example, the DOWN bandwidth is usually not a problem but the UP bandwidth can be one - especially with home Internet access as they usually have asymmetric bandwidth where the DOWN bandwidth is much higher then the UP bandwidth.
Here's another example with one channel set to Speex 12.3, 10 people in the only channel and two persons are speaking:
DOWN: 1 * 12.3 Kbit/s = 12.3 Kbit/s
UP: 2 * (10 - 1) * 12.3 Kbit/s = 221.4 Kbit/s
The last example shows how the bandwidth requirement explodes when more then one people are speaking at the same time. In TeamSpeak 2 there is no setting to stop simultaneous speaking.
Client bandwidth calculation
Lets look at the bandwidth requirement for the client. We'll explain this by looking at the two examples above. UP and DOWN bandwidth are now contrary when looking at the client. We always assume that the client we are looking at is the one or one of the speaking person. If he is listening, there is only DOWN bandwidth required.
DOWN: 0 * 12.3 Kbit/s = 0 Kbit/s
UP: 1 * 12.3 Kbit/s = 12.3 Kbit/s
DOWN: 2 * 12.3 Kbit/s = 24.6 Kbit/s
UP: 1 * 12.3 Kbit/s = 12.3 Kbit/s
Bandwidth requirement for the client are usually not a big issue, unless you're in a Speex 25.9 channel with an analog Internet access. But when hosting a server at home, you have to be aware, that especially the UP bandwidth is the limiting factor.
med andra ord så behöver du inte oroa dig för bandbreddsproblem om du enbart hostar en TSServer och spelar samtidigt på 100Mbit fiber
Sökningen pågår
Avancerad sökning
5
Battlefield 3 - PSN-ID-tråden
10 bilder
419 filmer
Minhembio - Senaste nyheterna





Fler
Vilka bilder visas här?